P1000m5 Is anyone running 15x10 5+5 (0 offset) wheels in the back of their p1000-5s?

[Antics22]

I see lots of people running 14/15x7 4+3 (+10mm) wheels in the rear and then adding aggressive spacers on top of that.

Assuming the 15x10 clears the rear hub/brake, 0 offset should only stick out about just an inch more without the need for the spacer…. Anyone try this?

 

[Admin]

 

[Fatsquatch]

I see lots of people running 14/15x7 4+3 (+10mm) wheels in the rear and then adding aggressive spacers on top of that.

Assuming the 15x10 clears the rear hub/brake, 0 offset should only stick out about just an inch more without the need for the spacer…. Anyone try this?

Peeps chose the same rim and then run a spacer on the rear to have a common spare and an even track width.

But you can do whatever you like really.

 

[Antics22]

Peeps chose the same rim and then run a spacer on the rear to have a common spare and an even track width.

But you can do whatever you like really.

I totally get that, but if I wanted to do a staggered setup, does anyone know if a15x10 clears the rear hub/spindle/brake rotor on the P1000-5? I know the Talon guys run this size with sand tires etc..

Thanks in advance

 

[Fatsquatch]

I totally get that, but if I wanted to do a staggered setup, does anyone know if a15x10 clears the rear hub/spindle/brake rotor on the P1000-5? I know the Talon guys run this size with sand tires etc..

Thanks in advance

I think the stockers are 14’s so I suspect the 15’s would clear even with the offset difference. I don’t know the answer for sure though. Hopefully someone has done it and can confirm.

 

[JenElio]

I see lots of people running 14/15x7 4+3 (+10mm) wheels in the rear and then adding aggressive spacers on top of that.

Assuming the 15x10 clears the rear hub/brake, 0 offset should only stick out about just an inch more without the need for the spacer…. Anyone try this?

So you're trying to run a 10" wide wheel? With a 10" wide tire??