P1000 Lightbar install help needed

[BeardedTexan]

Looking for tips on the best way to mount a lightbar on my Honda Pioneer 1000. The roof overhangs which blocks for an easy mount and requires brackets. Can anyone share what lightbar they purchased and what brackets they used? Thx in advance!

 

[Admin]

 

[Montecresto]

Looking for tips on the best way to mount a lightbar on my Honda Pioneer 1000. The roof overhangs which blocks for an easy mount and requires brackets. Can anyone share what lightbar they purchased and what brackets they used? Thx in advance!

View attachment 107787

Auxbeam here with milled brackets.

 

[OleRed]

auxbeam pods (with side lights)... I used the screws the hold the lower part of windshield on for a mount location

 

[1Ktrailrider]

A few people make brackets to buy but I would rather make my own. I simply found a piece of 3" angle and trimed it with a cutoff wheel and drilled some holes. It doesn't shake or wobble at all and I spent plenty of time aligning it and adjusting my bracket so it fit just right. I have a 52" curved light bar from Amazon. $53.

 

[JTW]

I’m not a fan of roof mounts... they tend to become trail litter!

 

[BeardedTexan]

Thank you all for the suggestions! Exactly what I neeeded to know! Ijust completed my switch panel install with relay pack and all. Local dealership is asking arm and leg for extra battery and kit to tie in with current charging system.

Do you all by chance have link on items you purchased for the 2nd battery and kit to tie in with factory charging system?

 

[Montecresto]

Thank you all for the suggestions! Exactly what I neeeded to know! Ijust completed my switch panel install with relay pack and all. Local dealership is asking arm and leg for extra battery and kit to tie in with current charging system.

Do you all by chance have link on items you purchased for the 2nd battery and kit to tie in with factory charging system?

View attachment 107951

Dual Battery Install with TRUE Isolator

 

[BeardedTexan]

Dual Battery Install with TRUE Isolator

Thank you for your time and information!

 

[BeardedTexan]

A few people make brackets to buy but I would rather make my own. I simply found a piece of 3" angle and trimed it with a cutoff wheel and drilled some holes. It doesn't shake or wobble at all and I spent plenty of time aligning it and adjusting my bracket so it fit just right. I have a 52" curved light bar from Amazon. $53.

View attachment 107814 View attachment 107815 View attachment 107816 View attachment 107817

Thank you for your time and information!