BOX1

P700 My 700 Build

P

PartsGuy03

New Member
Jan 19, 2021
14
21
3
Ft. Lauderdale
Ownership

  1. 700-4
I know this is yet another 700-4 build, but it's mine to share. I'm new to the side-by-side game and wanted to thank everyone in advance for their posts as I stole almost all these upgrades from your experiences. I'm not a professional, do so at your own risk.

Going through the pictures.

  1. Of course Mystic tailgate levelers.
  2. 2016 Canam Defender Shocks (2.5" lift) bushings from polys supply. Had to sand down poly bushings the get close enough fit.
  3. Used orange paint marker to mark everything to see in dark better.
  4. Marked all door handles from above with yellow paint marker for easier visibility
  5. Wrapped main exhaust with header wrap. Yes, it's still hot as all when you touch the plastic.
  6. Rear shock install pic.
  7. Getting ready for Snorkel Install. Used 2" spa hose and various 45 and 90 degrees for minimalistic routing. Bought a warrior riser separately. All said less than $100 into the snorkel.
  8. Turned the front of the area into my electrical tray. Bent up an old computer case to 35 degrees and walla!
  9. Didn't like the front bumper. 1" electrical conduit bent into a light bar. Drill hole into the bumper and put pipe all the way in and welded around, very rigid.
  10. Rear Money shot of installed shocks, really nice and smooth ride. Well worth the $330 for the shocks.
  11. If you notice the green I Eastwood undercarriage sprayed every internal pipe I could before capping them off.
  12. 1 5/8 Clamp-on bar clamps for the custom horizontal bar. The bar is used for rear harness straps and adjustable rear headrests. Quick story - We had a friend who off-roaded all the time with their kids in a jeep. One day they were having a great time and noticed their son fell asleep in the back seat. When they got back he did not wake up. Turned out he slammed his head on the roll bar and broke his neck. The Honda rear seat is a square metal tube that will hurt you.
  13. Rear storage area. 3/4" metal conduit bent into 90 degrees. Leftover 3/8 rod from child door gate. Bottom flat plat leftover door from the old electrical panel. Sidebars are 2" angle iron. One nutsert into the hole under the plastic cap on the tailgate latch area and use a stock bolt for tiedown. It is semi-permanent and requires removal to close the gate.
  14. Used 2 Polaris ranger headrests as they had the bolt pattern I was looking for mounting. Adjustable for kids and adults. Use a push pin to hold. In top position clears bed tilt.
  15. Mystic switch panel did not clear switches as metal reinforcement behind dash prevented attachment. Used 2 .5 inch PVC board cutout outs as spacers (shown in later pic)
  16. Front and rear differentials got bellows breathers (yes fan breather was attached in front).
  17. My electrical panel comes to fruition. The stinger accessory switch ran off of a lighter accessory as a trigger. Winch manual also mounted inside. 6 gauge wiring to battery for positive and negative. Also made the black cover plate to reduce mud into electrical and it worked well, 12-degree bend if I remember correctly.
  18. Honda 1000 wheels and 27 bighorns using 1.5" 4X137 to 4X100 adapters. 15.5 inches of clearance.
  19. Rear shot of quick release fire extinguisher and cargo area.
  20. Spaced out switch panel with PVC. Did dome and cargo light with 8" 12v led strips.
  21. Forgot - I also added a 3500lb winch with a 7 K-rated lifting eyebolt mounted on the winch tray so I can double back hook safely.
This is my story so far. It worked very well. My wife loves it compared to a 4 wheeler. We put over 6 hours of trail time on her so far.

So what do you think? What would you have done differently or what did I miss? open to positive comments and ideas.

Take care,

PartsGuy

20210220 201343 20210221 132228 20210221 132450 20210227 130118 20210227 130129 20210227 130132 20210227 131259 20210228 085815 20210228 155947 20210228 162601 20210306 092409 20210306 132248 20210312 205222 20210319 173142 20210319 175738 20210319 175751 20210321 132923 20210321 132930 20210321 132934 20210321 145054 20210321 145103 20210321 145113 20210321 171055 20210322 092527 20210322 093529 20210322 093818 20210322 183816 20210322 183817 20210326 102849 20210326 102901 20210326 102912 20210326 102921 20210326 102929
 
Smoking Joe

Smoking Joe

Well-Known Member
Mar 27, 2021
134
418
63
Alaska
Ownership

  1. 700-2
Good call on only ordering the riser for the snorkel! Bought the kit and its janky! No brackets just a handfull of zip ties! Gee thanks!
 
  • Like
Reactions: Backwoods
Smoking Joe

Smoking Joe

Well-Known Member
Mar 27, 2021
134
418
63
Alaska
Ownership

  1. 700-2
Made the passenger seat belt unusable so I pulled it off and drilled the riser...factory bolt thru riser with rubber washers into the seatbelts bracket! Not going to rely on zipties to keep her in place!
 
P

PartsGuy03

New Member
Jan 19, 2021
14
21
3
Ft. Lauderdale
Ownership

  1. 700-4
Nice I liked the flexibility of the spa tubing, I only have a short section of 2" hard pipe and most of it is 90 and 45-degree fitting.
 
BOX2
box3

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!