New member and owner of pioneer 1000

[ElbowDeep]

My name is anthony and i am a new owner of a 2016 pioneer 1000-5 side by side as of 24 hours ago. I am definantly elbow deep in honda now. Today i have it apart just about as far as you can go. Lol. I bought it with the engine locked up and im currently learning all about the Honda Pioneer 1000 first hand. Hope to maybe pick some brains later if i get stuck during reassembly.

 

[Admin]

 

[HondaTech]

Everything and I mean everything in that engine needs to be clean if its been under water. If you hesitate for a minute about replacing something that could potentially be full of debris, replace it, including the clutch assemblies. They might look clean, but the fibers can hold things.

Also check the emergency valve for scratches and burs, replace it and the clutch cover if they are scored. It can cause all sorts of headaches.

Oh and if you remove the seat rail you don't have to cut that bar out, lol.

 

[Isaiah]

My name is anthony and i am a new owner of a 2016 pioneer 1000-5 side by side as of 24 hours ago. I am definantly elbow deep in honda now. Today i have it apart just about as far as you can go. Lol. I bought it with the engine locked up and im currently learning all about the Honda Pioneer 1000 first hand. Hope to maybe pick some brains later if i get stuck during reassembly.View attachment 198188

Welcome to the club from Tennessee. I love my 1000-5. Best of luck on getting it up and running

 

[ElbowDeep]

Everything and I mean everything in that engine needs to be clean if its been under water. If you hesitate for a minute about replacing something that could potentially be full of debris, replace it, including the clutch assemblies. They might look clean, but the fibers can hold things.

Also check the emergency valve for scratches and burs, replace it and the clutch cover if they are scored. It can cause all sorts of headaches.

Oh and if you remove the seat rail you don't have to cut that bar out, lol.

The clutch does not look good. The engine was full of fuel and other liquid. Main bearings look good. Someone took the cam and ditched the cam caps so it looks like im gonna have to get a head.... Sad story since this head is in such good shape. Will need rings and a good honing. Ill replace the rod bearings just cause its already apart as well. Ill clean out the clutches snd check them later on.

 

[906UP]

Welcome to the forum from da U.P. eh!

Good luck on the resurrection, keep us updated on your progress.

 

[Todd627]

Another welcome from The Great Lakes State

#NTC

 

[russknight]

Welcome form the swamps of North Florida! Keep us in the loop on the project!

 

[ElbowDeep]

Welcome to the forum from da U.P. eh!

Good luck on the resurrection, keep us updated on your progress.

The project will be on hold for a week or two because I just spent 1000 dollars on Brute force engine parts. That should come in later this week and I have to get that engine off my table before i can really dig into this one. lol.

 

[DaddyDubbs]

Welcome from Alabama, best of luck on your project.

 

[ElbowDeep]

Thanks for the warm welcome. I am from Southeastern Kentucky Myself.

 

[JenElio]

Welcome from South FL!
Looks like a job n a half there, good luck. Keep the pics coming

 

[Mudwing]

Welcome from the mud holes of the 716. I’ll be looking forward to seeing the maiden voyage ride pics. 😉
#ntc😎

 

[Russ989]

My name is anthony and i am a new owner of a 2016 pioneer 1000-5 side by side as of 24 hours ago. I am definantly elbow deep in honda now. Today i have it apart just about as far as you can go. Lol. I bought it with the engine locked up and im currently learning all about the Honda Pioneer 1000 first hand. Hope to maybe pick some brains later if i get stuck during reassembly.View attachment 198188

Welcome to the club, let’s get wrenching! 🧰

 

[ElbowDeep]

Flywheel tool came in yesterday so i was finally able to get the broken flywheel bolt out that someone screwed up. Waiting on the parts now to put the engine back together... May be able to drive my pioneer for the first time by next weekend... We will see.

 

[1border4manu]

Welcome from central Florida. Looking forward to your build.

 

[NTCPrezJB]

Best of luck on the project and welcome to the forum from Canton, OH

#NTC

 

[100Acre]

My name is anthony and i am a new owner of a 2016 pioneer 1000-5 side by side as of 24 hours ago. I am definantly elbow deep in honda now. Today i have it apart just about as far as you can go. Lol. I bought it with the engine locked up and im currently learning all about the Honda Pioneer 1000 first hand. Hope to maybe pick some brains later if i get stuck during reassembly.View attachment 198188

Better than defiantly elbow deep in a dirty bucket! EMOCLEW MORF HTORN ANILORAC!

 

[ElbowDeep]

Anyone got a good Pioneer 1000 connecting rod laying around? Or know the right person on here to contact about getting one?

 

[ElbowDeep]

Anyone got a good Pioneer 1000 connecting rod laying around? Or know the right person on here to contact about getting one?

Just broke down and got a new one... Didnt want to have to wait that long but oh well

 

[Smitty335]

My name is anthony and i am a new owner of a 2016 pioneer 1000-5 side by side as of 24 hours ago. I am definantly elbow deep in honda now. Today i have it apart just about as far as you can go. Lol. I bought it with the engine locked up and im currently learning all about the Honda Pioneer 1000 first hand. Hope to maybe pick some brains later if i get stuck during reassembly.View attachment 198188

Don't know how I missed this! But WELCOME from NW Arkansas! Tires are worn out how many miles on your buggy? Did the previous owner drown your buggy?