P700m4 Plow is on!

[Dpetrocik]

I used the Honda accessory harness 08Z08-HL5-A00 for a plug and play "key on" for my winch. Works perfect! The winch is a viper max 4000#. I still had my motoalliance denali 72" pro plow from my last sXs so I bought the correct pioneer mount ($100). Took a couple hours and hooked it all up! Now we will see if it snows tonight! But I doubt it since I'm prepared haha.

 

[Admin]

 

[Dpetrocik]

 

[AKRider]

View attachment 26771

Now you're going to want a light bar so at night you can see over the plow when you raise it

 

[Dpetrocik]

Now you're going to want a light bar so at night you can see over the plow when you raise it

I just so happen to have one that I kept from my other sXs as well! Waiting on my switch plate so I can mount my rockers
Just have to figure out where to mount it? Top roll bar, I've seen some on the front dash area in front of the windshield, or maybe on the top bar of the bumper?

 

[AKRider]

I just so happen to have one that I kept from my other sXs as well! Waiting on my switch plate so I can mount my rockers
Just have to figure out where to mount it? Top roll bar, I've seen some on the front dash area in front of the windshield, or maybe on the top bar of the bumper?

I'd say its a personal preference thing. I have mine mounted on my roof. I like it up there.

 

[Dpetrocik]

I'd say its a personal preference thing. I have mine mounted on my roof. I like it up there.

No roof yet

 

[AKRider]

No roof yet

You could go cheap and temporary. I have a buddy that painted and sealed the edges of a piece of 5/8" plywood. He bolted it up with U bolts. The thing he likes the most is that he can sit or stand on it while he's glassing for game.

 

[Dpetrocik]

You could go cheap and temporary. I have a buddy that painted and sealed the edges of a piece of 5/8" plywood. He bolted it up with U bolts. The thing he likes the most is that he can sit or stand on it while he's glassing for game.

I might just have to do that!