Rear seat console

[Willissxs]

I have searched and did not find anything related to a rear seat console for 1000-5. Back seat riders don’t like the cup holders on doors. Just wondering if anybody has come up with any type of rear seat console with cup holders

 

[Admin]

 

[Robobrainiac]

I know you can put these in the doors front and rear

https://amazon.com/gp/aw/d/B07CP1LVZ7?tag=sxsweb24-20

 

[Robobrainiac]

I thought there was someone on here who had cup holders in the rear attached to the grab bar but I cannot find it.

 

[Robobrainiac]

As far as center consoles go I have not seen one and I would not think there is enough room between rear passengers.

 

[Neohio]

I would go with either of these options.
Probably the second one so removal/installation is tool less.

https://www.amazon.com/RAM-MOUNTS-RAM-B132R-Holder-U-Bolt/dp/B000WJ3I1M/?tag=sxsweb24-20

Or

https://www.amazon.com/RAM-MOUNTS-RAM-B-132-400U-Tough-Claw-Self-Leveling/dp/B00PAQKQH6/?tag=sxsweb24-20

 

[Remington]

I have searched and did not find anything

So have we! As in, Cant find any pics of your rig🤨 🥳
Pics Or It Didnt Happen! 🥳

There really hasnt been anything like that but what was mentioned above. Mainly cuz of the removal of it every time u need to use the bed.
But if your insisted on having something like that, Id say Tag your it! Just make sure to come back and tell us what u did and for Pete’s sake post pics of it! Im sure thats what u were hoping for when u were looking.

 

[Willissxs]

Good ideas. I’ll play around with some
stuff then post pics

 

[Adam490]

There are these that I've seen:

PRE-ORDER: Honda Rear Dual Cup Caddy

Quick-release double cup holder that mounts in the back seat of the Honda Pioneer (1000 only) with existing stock hardware. This cup holder comes...

www.ridetimesolutions.com

I think there is also someone that makes a similar product that just uses the inserts like everybody installs in the stock Pioneer cupholder holes.

 

[Jankyeye]

I've seen something advertised on facebook. Cant seem to find it again

 

[Remington]

I've seen something advertised on FACETURD. Cant seem to find it again

fixed it for ya! 🥳

 

[Willissxs]

Those look pretty cool but a bit pricey. I think I am going to get the cup holder inserts and try and use Velcro or magnets to hold them. I’ll let you know how it turns out

 

[JMynes]

There are these that I've seen:

View attachment 374554

PRE-ORDER: Honda Rear Dual Cup Caddy

Quick-release double cup holder that mounts in the back seat of the Honda Pioneer (1000 only) with existing stock hardware. This cup holder comes...

www.ridetimesolutions.com

I think there is also someone that makes a similar product that just uses the inserts like everybody installs in the stock Pioneer cupholder holes.

That looks like a facial laceration / tooth removal kit.

 

[Willissxs]

Ok so here is what I came up with. I had a fender clip that fits my pontoon rail. Fits perfect on center floor sq tubing in back. Bought a couple of cup holders attached everything to a piece of plywood and done. Somebody said I never posted a pic of my rig so here it is as well

 

[JenElio]

Ok so here is what I came up with. I had a fender clip that fits my pontoon rail. Fits perfect on center floor sq tubing in back. Bought a couple of cup holders attached everything to a piece of plywood and done. Somebody said I never posted a pic of my rig so here it is as well

View attachment 375285 View attachment 375286 View attachment 375287 View attachment 375288

Looks good 👍

 

[NTCPrezJB]

Ok so here is what I came up with. I had a fender clip that fits my pontoon rail. Fits perfect on center floor sq tubing in back. Bought a couple of cup holders attached everything to a piece of plywood and done. Somebody said I never posted a pic of my rig so here it is as well

View attachment 375285 View attachment 375286 View attachment 375287 View attachment 375288

That’ll work!

Might keep a cup of coffee or hot chocolate warm too! (sarcasm for those that think they bought a jeep)

 

[Prntckt]

I would go with either of these options.
Probably the second one so removal/installation is tool less.
View attachment 374514

https://www.amazon.com/RAM-MOUNTS-RAM-B132R-Holder-U-Bolt/dp/B000WJ3I1M/?tag=sxsweb24-20

Or
View attachment 374515

https://www.amazon.com/RAM-MOUNTS-RAM-B-132-400U-Tough-Claw-Self-Leveling/dp/B00PAQKQH6/?tag=sxsweb24-20

I have used these in my Pioneer. They are pricey, but work really well. The claw mount holds well and is easy to adjust.