P1000 RECALL - Loose Throttle Body - ALL Honda Pioneer 1000 models. 16-18

[mlhannah1]

Yeah a person gets "pixxed" on Honda's QC, or lack of! I know Honda is recalling stuff that other UTV brands would not. But for the price we all give for the pioneer 1000-5 dlx. plus adding front bumper, rear bumper, roof, winch, rock sliders, lights, fans, extra back up battey, throttle max, A arm guards.......Then recalls for the heat, clutch, doors, now throttle body connection, and not to mention the plastic guard to stop water from flooding the motor. Also waiting a month to get in to any dealer in Ohio.

 

[Admin]

 

[Neohio]

Also waiting a month to get in to any dealer in Ohio.

I know the feeling. My dealer in Mentor was 3 weeks before they would look at it, then wanted it an additional 3 weeks to fix it.
Next week I will drive it to work, have them drive it to inspect the clutches, order all the parts, and when it comes in, I will drop it off on the way to work and pick it up on the way home.
Ideally I'd like to find a dealer that is willing to hand the parts to me and let me do it myself. I wouldn't even care if they charged Honda the warranty time. I just don't care for the service department at all.

 

[mlhannah1]

Your right Neohio
My machine is located in southern Ohio, the closest dealer is Rarden, Ohio. They are backed up about a month. Maysville Ky. Honda closed up shop, so Honda dealers are far and few between.

 

[CTDpower]

Ideally I'd like to find a dealer that is willing to hand the parts to me and let me do it myself. I wouldn't even care if they charged Honda the warranty time. I just don't care for the service department at all.

One time I had a warranty issue on my ram 3500 (needed a new airbox, $400 part). And after a few phone calls and emails I finally convinced them to just mail me the airbox. I had to explain to them how i didnt trust the only ram dealer within an hours drive from my house with specific examples of terrible work they had done for me in the past. But in the end, a new airbox showed up on my doorstep.

 

[CTDpower]

Wrong wording... this dealer was an hour drive. The next closest was about 2 hours. Took a little convincing, but the conversations were actually rather tame and professional. I didn't like that all I needed was a lid but they had to send me the whole airbox assembly, but that is expected (just seems like a waste). All in all, over the last 12 years, I couldn't be happier with ram/Cummins trucks.

 

[Dasmoeturhead]

you must not own a sig

Nope.

 

[mjn]

you must not own a sig

I own several. Freakinfantastic firearms. My P229 in .357 sig has thousands and thousands of rounds thru it. Not one jam, or miss-feed. If you've had an issue with a Sig Sauer.. you are the minority.

 

[JTW]

I own several. Freakinfantastic firearms. My P229 in .357 sig has thousands and thousands of rounds thru it. Not one jam, or miss-feed. If you've had an issue with a Sig Sauer.. you are the minority.

They recently had a recall was the point of his comment.

 

[Ragnar406]

I own several. Freakinfantastic firearms. My P229 in .357 sig has thousands and thousands of rounds thru it. Not one jam, or miss-feed. If you've had an issue with a Sig Sauer.. you are the minority.

Sig has had to recall one of their pistols (edit to add P320) for firing if dropped (something like that) + 2 of their recipe the released guns have known issues that they had to make design changes after launch and ask to have the initial ones sent in to have semi updated as they can truly not fit the old design. MPX being one and their new compact carry P365 was going to be gamechanging in a lot of ways but has Had reliability issues

 

[mjn]

Sig has had to recall one of their pistols (edit to add P320) for firing if dropped (something like that) + 2 of their recipe the released guns have known issues that they had to make design changes after launch and ask to have the initial ones sent in to have semi updated as they can truly not fit the old design. MPX being one and their new compact carry P365 was going to be gamechanging in a lot of ways but has Had reliability issues

Damn. Didn’t know that. Why would they rush a product to market & risk messing up a stellar reputation..
Yes. I see the analogy now.

 

[JTW]

Damn. Didn’t know that. Why would they rush a product to market & risk messing up a stellar reputation..
Yes. I see the analogy now.

@Ragnar406 may not know s*** about shampoo but he knows his guns!

 

[ofrcboy]

Took mine in yesterday, quick check and on my way.

 

[JTW]

Took mine in yesterday, quick check and on my way.

Why?

 

[Eltobgi]

It was time to service the Beast so I figured I would check to see what all the fuss is about while I was in the vicinity...

Everything seemed to be tight and in place. I couldn’t find the problem.

 

[ofrcboy]

Why?

Recall JTW

 

[ofrcboy]

Why?

Why? you sound like my grandson

 

[JTW]

Recall JTW

I don’t recall

 

[JTW]

Why? you sound like my grandson

Why’s that?

 

[Ericthered]

It was time to service the Beast so I figured I would check to see what all the fuss is about while I was in the vicinity...
View attachment 85567 View attachment 85568 View attachment 85569
Everything seemed to be tight and in place. I couldn’t find the problem.

Like you I am scheduled for trips and looked to see what could be wrong with the fuel area. Found one clamp so loose it was hanging. Others a little loose. Other than that the base screws were a 1/2 a turn loose. Glad I looked. This last trip was jumping over sage brush 2 ft high and it would have sucked a lot of dust.

 

[rlutech]

For those of us that don’t want to load up, tie down and transport our machines an hour plus, to than explain to the service writer about a campaign that he has no clue about, to than release our machine to a kid that has less experience than we do with the machine. Just for a 18 min. Inspection. Do we know what they are looking for or at yet? Is it just loose mounting bolts?


Sent from my iPhone using Tapatalk

Couldn’t have said this better myself! I’m getting all of the campaigns taken care of next week on my 2016. I’m actually nervous to take my machine to the dealership. Usually a bunch of 18-24 year olds, who do not know anything about what they’re doing, except how to wear a terrible flat brimmed hat.