P1000 Roll Cage Diameter

[bigr244]

I have a 2018 P 1000 5 and I just measured the cage at 1.813. Any ideas where I can find light bar clamps that size. I was expecting the 1.75 to fit but I guess my P 1000 was beefed up from what I am reading.

Thank you,

 

[Hondasxs]

Hi.
Pioneer 1000 main ROPS is 45mm bar size.
Or 1.772 inch.

Most light and medium duty 1.75 clamps will fit.
The more heady duty clamps will also fit if you ground off the edges some where they meet.

Sent from my SM-G955U using Tapatalk

 

[ohanacreek]

I have a 2018 P 1000 5 and I just measured the cage at 1.813. Any ideas where I can find light bar clamps that size. I was expecting the 1.75 to fit but I guess my P 1000 was beefed up from what I am reading.

Thank you,

Fit 1” up to 2” Ive used them to hold light bars and even my heavy wetsounds bar. They don’t move.

https://www.tractorsupply.com/tsc/product/traveller-1-in-adjustable-tube-mount

 

[clifforeilly]

I have a 2018 P 1000 5 and I just measured the cage at 1.813. Any ideas where I can find light bar clamps that size. I was expecting the 1.75 to fit but I guess my P 1000 was beefed up from what I am reading.

Thank you,

These clamps work if you make your own reducer out of 1/4" rubber. They are what I used to mount my roof. Cant beet the price!

Just be sure not to over tighten the screws.

 

[GlockMeister]

Fit 1” up to 2” Ive used them to hold light bars and even my heavy wetsounds bar. They don’t move.

https://www.tractorsupply.com/tsc/product/traveller-1-in-adjustable-tube-mount

Best clamp out there imo! Used them to mount my whips and wetsound bar as well.

 

[ohanacreek]

Best clamp out there imo! Used them to mount my whips and wetsound bar as well.

AND only $15