TALON 1000R FRONT-END BRACE KIT

[SuperATV]

TALON 1000R FRONT-END BRACE KIT​

Link: https://www.superatv.com/honda-talon-front-end-brace-kit







Front-End Support
You didn't invest in your Talon to sit back and watch everyone else rock crawl, mud dive, and blaze through rough terrain. Get in there and ride with the best of them knowing SuperATV's Honda Talon Front-End Brace Kit has your back. Are you worried about your Talon's weak spots? Our front-end brace kit will increase the longevity of your suspension parts, reinforce your A-arms' mounting positions, and strengthen the weak points in your shock tower. With this front-end brace kit installed, you can ride as hard as you want knowing your Talon has the support it needs.

Heavy-Duty Construction
We know the rugged terrain you're up against, so we've designed this front-end Talon brace kit to handle the abuse. We cut it 3/16" thick from heavy-duty steel plating—this front-end brace kit will hold up no matter how violent the trail gets. And for extra durability, we've added our UV-resistant powder coating to fight off rust and corrosion. Plus, it's easy to install. You'll be challenging your buddies on the roughest terrain in no time.

• Made with 3/16” heavy-duty steel plating
• Reinforces your A-arms' mounting positions
• Strengthens weak points in frame
• UV-resistant powder coat finish
• Easy to install

• Honda Talon 1000R : 2019+

 

[906UP]

Nice!!!! If my Talon survives the M.O.M. I'll be ordering a set

 

[Adam490]

TALON 1000R FRONT-END BRACE KIT​

Link: https://www.superatv.com/honda-talon-front-end-brace-kit

View attachment 355242
View attachment 355243
View attachment 355244
View attachment 355245
View attachment 355246

Front-End Support
You didn't invest in your Talon to sit back and watch everyone else rock crawl, mud dive, and blaze through rough terrain. Get in there and ride with the best of them knowing SuperATV's Honda Talon Front-End Brace Kit has your back. Are you worried about your Talon's weak spots? Our front-end brace kit will increase the longevity of your suspension parts, reinforce your A-arms' mounting positions, and strengthen the weak points in your shock tower. With this front-end brace kit installed, you can ride as hard as you want knowing your Talon has the support it needs.

Heavy-Duty Construction
We know the rugged terrain you're up against, so we've designed this front-end Talon brace kit to handle the abuse. We cut it 3/16" thick from heavy-duty steel plating—this front-end brace kit will hold up no matter how violent the trail gets. And for extra durability, we've added our UV-resistant powder coating to fight off rust and corrosion. Plus, it's easy to install. You'll be challenging your buddies on the roughest terrain in no time.

• Made with 3/16” heavy-duty steel plating
• Reinforces your A-arms' mounting positions
• Strengthens weak points in frame
• UV-resistant powder coat finish
• Easy to install

• Honda Talon 1000R : 2019+

Does the big plate reinforce the front lower arm tabs and the lower bumper mounts? Didn’t see any photos of that piece

 

[SuperATV]

Does the big plate reinforce the front lower arm tabs and the lower bumper mounts? Didn’t see any photos of that piece

The separate frame stiffener would reinforce the lower arm tabs. https://www.superatv.com/amfile/file/download/file/4206/product/14998/

This will reinforce the upper arm tabs. Not sure on the bumper mounts. I didn't know this was ready, and haven't gone out to check yet. I'll go find it later and get more info.

 

[Adam490]

The separate frame stiffener would reinforce the lower arm tabs. https://www.superatv.com/amfile/file/download/file/4206/product/14998/

This will reinforce the upper arm tabs. Not sure on the bumper mounts. I didn't know this was ready, and haven't gone out to check yet. I'll go find it later and get more info.

View attachment 355369

Yeah, I get that. I'm talking about this dude:

COME ON MAN

 

[Smitty335]

Yeah, I get that. I'm talking about this dude:

COME ON MAN

View attachment 355371

He's been hangin out at the DF talking to the Dudeetts!

 

[SuperATV]

Yeah, I get that. I'm talking about this dude:

COME ON MAN

View attachment 355371

Finally got to go out and check it out in the shop.

I think you're referring to the section circled below...



The brace does not bolt up there. That would be part of the winch mount brace that goes across and bolts to both sides. The big flat piece mounts to both of the side A-arm brackets, and is attached just above the bracing above the diff.

 

[Adam490]

Finally got to go out and check it out in the shop.

I think you're referring to the section circled below...

View attachment 356103

The brace does not bolt up there. That would be part of the winch mount brace that goes across and bolts to both sides. The big flat piece mounts to both of the side A-arm brackets, and is attached just above the bracing above the diff.

Thanks! I see it now, it's what ties the upper pieces together 👍

I was referring to this lower bumper mount that gets smashed all to s*** because it is made of cheese, which is why I was wondering how that was going to do anything to help 😂:

 

[Remington]

TALON 1000R FRONT-END BRACE KIT​

Link: https://www.superatv.com/honda-talon-front-end-brace-kit

View attachment 355242
View attachment 355243
View attachment 355244
View attachment 355245
View attachment 355246

Front-End Support
You didn't invest in your Talon to sit back and watch everyone else rock crawl, mud dive, and blaze through rough terrain. Get in there and ride with the best of them knowing SuperATV's Honda Talon Front-End Brace Kit has your back. Are you worried about your Talon's weak spots? Our front-end brace kit will increase the longevity of your suspension parts, reinforce your A-arms' mounting positions, and strengthen the weak points in your shock tower. With this front-end brace kit installed, you can ride as hard as you want knowing your Talon has the support it needs.

Heavy-Duty Construction
We know the rugged terrain you're up against, so we've designed this front-end Talon brace kit to handle the abuse. We cut it 3/16" thick from heavy-duty steel plating—this front-end brace kit will hold up no matter how violent the trail gets. And for extra durability, we've added our UV-resistant powder coating to fight off rust and corrosion. Plus, it's easy to install. You'll be challenging your buddies on the roughest terrain in no time.

• Made with 3/16” heavy-duty steel plating
• Reinforces your A-arms' mounting positions
• Strengthens weak points in frame
• UV-resistant powder coat finish
• Easy to install

• Honda Talon 1000R : 2019+

Did u acually write this up? Its really good! All your missing is the audio and the god like reverb in the background 🤣

 

[SuperATV]

Thanks! I see it now, it's what ties the upper pieces together 👍

I was referring to this lower bumper mount that gets smashed all to s*** because it is made of cheese, which is why I was wondering how that was going to do anything to help 😂:

View attachment 356104

View attachment 356105

View attachment 356106

You need a bumper for your bumper! 🤣

 

[SuperATV]

Did u acually write this up? Its really good! All your missing is the audio and the god like reverb in the background 🤣
View attachment 356114

Oh no....you know they won't let this long haired hillbilly write the copy. You've seen some of my posts....

The TALON FRONT END BRACE
- Adds 22 HP
- Made out of billet adamantium (Marvel ain't gonna like that one)
- Jumps out of the box and installs itself in minutes!
- Makes your front end stiffer than any blue pill ever will
- Drops all the panties within a 3 mile radius!

🤣🤣

 

[Adam490]

You need a bumper for your bumper! 🤣

That sir, is a "brush guard"....

Got a real bumper coming soon hopefully.

 

[TripleB]

Thanks! I see it now, it's what ties the upper pieces together 👍

I was referring to this lower bumper mount that gets smashed all to s*** because it is made of cheese, which is why I was wondering how that was going to do anything to help 😂:

View attachment 356104

View attachment 356105

View attachment 356106

How come all your s*** is always smashed up?

 

[TripleB]

- Drops all the panties within a 3 mile radius!

🤣🤣

Can I mod it to fit the pioneer 1000-5?

 

[HondaTech]

Thanks! I see it now, it's what ties the upper pieces together 👍

I was referring to this lower bumper mount that gets smashed all to s*** because it is made of cheese, which is why I was wondering how that was going to do anything to help 😂:

View attachment 356104

View attachment 356105

View attachment 356106

We braced the bottom of our race car bumper and it helped alot with that issue.

 

[Adam490]

How come all your s*** is always smashed up?

f***ing gravel roads are rough!

 

[SuperATV]

Can I mod it to fit the pioneer 1000-5?

The P1k-5 can carry a whole lot more panties. That's a mod worth doing!

 

[someguy1313]

Can I mod it to fit the pioneer 1000-5?

also curious...

 

[ODAMO]

Yeah, I get that. I'm talking about this dude:

COME ON MAN 👈@Scoop

View attachment 355371

 

[SuperATV]

also curious...

No idea! Never tried it. I doubt it, but who knows. I'll try to get some measurements tomorrow and compare between the who.