P1000m5 UTVMA Front bench seat fit into Pioneer 1000-5(heavy modification)

[Blaker3115]

I wanted to try something different and came up with this.

I’m sure there could be someone come up with a different mounting solution than I did but I decided to mount to the same seat Frame that was there for easy removal. One thing I would have done differently is not cut the full cushion out in the front ledge. I should have left around 7” still in tact from the front edge. I went ahead and put that piece back in to make it look better. Going to try and use some vinyl tape or glue it back in for a more completed look.

Below will be YouTube link videos for what I done to make it work. Not an easy mod but I feel was worth it for me and my family.
I’m happy with the comfort and quality as well.

Utvma Bench seat pioneer finished product

youtube.com

UTVMA bench seat install part 1 Honda Pioneer

youtube.com

UTVMA bench seat Pioneer part 2

youtube.com

UTVMA bench seat Pioneer part 3

youtube.com

Utvma bench seat Pioneer part 4

youtube.com

Utvma bench seat Pioneer part 5

youtube.com

Utvma bench seat pioneer part 7

youtube.com

Utvma bench seat pioneer part 8

youtube.com

Sent from my iPhone using Tapatalk

 

[Admin]

 

[Blaker3115]

Utvma Bench seat pioneer finished product

 

[NewHere2]

Lots of work, but it looks good !

 

[Remington]

Lots of work, but it looks good !

Ditto!

 

[Prntckt]

Nice professional install

 

[Bama-Daniel]

Looks great. Might have missed it if you said but what seats did you end up using on the back seats?

 

[Blaker3115]

Looks great. Might have missed it if you said but what seats did you end up using on the back seats?

The rear seats I got off ebay. They are rzr seats. Bolted to a bracket made by Rad Customs. Shop | Rad Customs, LLC

 

[ToddACimer]

Is the seat removable? Or with the belts installed is it pretty much stuck in there?

 

[Blaker3115]

Is the seat removable? Or with the belts installed is it pretty much stuck in there?

I used the one seat base to be removable. Just have to unhook the harness across top bar no tools required. If want to completely take out then just remove the bottom bolts of the harness


Sent from my iPhone using Tapatalk

 

[Jankyeye]

that's pretty sweet! good job