![Stevo](/data/avatars/m/7/7434.jpg?1516843003)
So my hardly used 2016 1000 has an idling issue. I have changed injector wires and put fresh gas in it. I only use premium non ethanol in it and was still not idling so today put in new spark plugs in and cleaned off air control valve. Now putting it back together so hoping it idles better now. Plugs didn’t look that good. It only gets short runs around our neighborhood and have read that it could foul plugs. Am having a hard time installing the piece of metal that goes on drivers side of intake on plastic piece that is behind back of seat cannot figure out what the purpose of that piece is for and is it necessary to have it on. ? Hoping someone can have some I put on this.
![AA26F9BF 656A 4481 A228 F4ABF2CE97A1 AA26F9BF 656A 4481 A228 F4ABF2CE97A1](https://hondasxs.com/data/attachments/349/349693-5e7a1147a870f878b8a237a33da27102.jpg)
![79775082 F91C 4A4D AE8D 8AF7A4511948 79775082 F91C 4A4D AE8D 8AF7A4511948](https://hondasxs.com/data/attachments/349/349690-d9fcdc86872a9fd696d64061a9e456d5.jpg)
![FCD51FAB 0CAB 44E2 BCCF 0B64A757B10E FCD51FAB 0CAB 44E2 BCCF 0B64A757B10E](https://hondasxs.com/data/attachments/349/349691-4f759a3fe9a542452cdd76de105826af.jpg)
![D3E465D8 A51C 4048 8969 0C7A26F1E89B D3E465D8 A51C 4048 8969 0C7A26F1E89B](https://hondasxs.com/data/attachments/349/349692-b624b66ae6cec991a3ec068879ec241e.jpg)
![AA26F9BF 656A 4481 A228 F4ABF2CE97A1 AA26F9BF 656A 4481 A228 F4ABF2CE97A1](https://hondasxs.com/data/attachments/349/349693-5e7a1147a870f878b8a237a33da27102.jpg)