P1000m5 2022 Grinch gets new grill, badlands 5500 and Bolt on shackle mounts

[ADVBUM]

Start. I got a take off bumper from craigslist. A badlands long drum APEX 5500 winch at the Harbor freight Christmas sale. Kfi mounting plate. Bolt on shacke mounts.

https://www.amazon.com/dp/B09NKC15K7?tag=sxsweb24-20

The shackle mounts inside plate needed to be trimmed down about 3/16 on each side.

The backing plate will fit perfect.

One of the bolts needed to be cut down. Put the bolt through both plates next to the nut and cut about 1/4 above nut.

The KFI mount would not work with the Badlands long drum apex 5500. The holes were 1/8 inch off. I had to cut the top of the KFI bracket down by 3/16 and wheeled out the bottom of the two upper bolt holes of the KFI bracket. I then opened / widened the KFI bracket using a car jack just enough so the winch would fit in and holes would line up. I test fit the winch in the bracket and then test fit bracket to the machine before installing.

I think it all turned out solid.

 

[TxDoc]

View attachment 414050

Start. I got a take off bumper from craigslist. A badlands long drum APEX 5500 winch at the Harbor freight Christmas sale. Kfi mounting plate. Bolt on shacke mounts.

https://www.amazon.com/dp/B09NKC15K7?tag=sxsweb24-20

The shackle mounts inside plate needed to be trimmed down about 3/16 on each side.View attachment 414053
The backing plate will fit perfect.
View attachment 414056

One of the bolts needed to be cut down. Put the bolt through both plates next to the nut and cut about 1/4 above nut.

View attachment 414058

The KFI mount would not work with the Badlands long drum apex 5500. The holes were 1/8 inch off. I had to cut the top of the KFI backet down by 3/16 and wheeled out the bottom of the two upper bolt holes of the KFI bracket. I then opened / widened the KFI bracket using a car jack just enough so the winch would fit in and holes would line up. I test fit the winch in the bracket and then test fit bracket to the machine before installing.

I think it all turned out solid.

View attachment 414061

Looks great ARMike

I think I have the same mounts

Sent from my motorola edge plus 2023 using Tapatalk

 

[Remington]

View attachment 414050

Start. I got a take off bumper from craigslist. A badlands long drum APEX 5500 winch at the Harbor freight Christmas sale. Kfi mounting plate. Bolt on shacke mounts.

https://www.amazon.com/dp/B09NKC15K7?tag=sxsweb24-20

The shackle mounts inside plate needed to be trimmed down about 3/16 on each side.View attachment 414053
The backing plate will fit perfect.
View attachment 414056

One of the bolts needed to be cut down. Put the bolt through both plates next to the nut and cut about 1/4 above nut.

View attachment 414058

The KFI mount would not work with the Badlands long drum apex 5500. The holes were 1/8 inch off. I had to cut the top of the KFI backet down by 3/16 and wheeled out the bottom of the two upper bolt holes of the KFI bracket. I then opened / widened the KFI bracket using a car jack just enough so the winch would fit in and holes would line up. I test fit the winch in the bracket and then test fit bracket to the machine before installing.

I think it all turned out solid.

View attachment 414061

I like it! Good job.
Was the neon style green on purpose or was the color match hard to get?

 

[ADVBUM]

I like it! Good job.
Was the neon style green on purpose or was the color match hard to get?

Darkest green I could get in that bolt on mount. Their neon green is really neon. Black was $47 vs green $27. Since the grinch is green I went that way.

https://www.amazon.com/dp/B09NKC15K7?tag=sxsweb24-20

 

[Remington]

Darkest green I could get in that bolt on mount. Their neon green is really neon. Black was $47 vs green $27. Since the grinch is green I went that way.

https://www.amazon.com/dp/B09NKC15K7?tag=sxsweb24-20

Those are nice if your mounting on a stock bumper.
Cant believe the color was cheaper than the black.

 

[Mopower58]

Looks good! 👍