Nice! Any chance you could put up a parts list?
Remington
Deputy Fife POIDH Enforcement Officer
Lifetime Member
Supporting Member
Well there's a first!
First post ever and a sh!t ton of pics and no commentary! Either illiterate or didn't get the memo? 😂
Newbies screw up and do it the other way around.
So...Commentary Or It Didn't Happen? 🤷♂️🤣🥳
A picture is worth a thousand words 🙄🤦
Remington
Deputy Fife POIDH Enforcement Officer
Lifetime Member
Supporting Member
Smitty335
Well-Known Member
Lifetime Member
Supporting Member
Welcome! If I remember correctly Red Lake is pretty large, think we stayed at a remote fishing lodge there. Parked our truck at a ramp, boat came picked up the family and I drove the boat to the lodge. When we left, a bunch of passed out Indians at the ramp?
I ordered the riser from SYA warrior that’s 2”
mainline is 2” I.D super flex pvc line I ordered from pondsonline.ca
I had to use to 2-2” rubber plumbing connections
Right off the main air box I used 45 degree elbow that has a 2” female and a male end the female connects to factory boot from box and male end you install 2” rubber coupler to pvc line
To plug off factory piping to airbox I installed a 45 degree male/female and installed female end of coupler to factory boot and installed 2” rubber end cap on male.
Probably the Barrens landing , don’t leave anything in your truck there Lol
Yep dam rights screwed the pooch that time I wrote up what I did and didn’t post dam newbies lol
