P1000 Anything new in 2024 P1000?

[sheamus]

I just noticed that the 2024 P1000 models are up on Honda's site. I found the press release: 2024 Honda Pioneer 1000 Features & Benefits.

I searched the forums, for a breakdown, but could only find mention of the 2024 700's, and of competitor's 2024 models. From what I can tell nothing has changed from 2023 (or 2022). Are there any changes other than colours and bold new graphics for the 2024 P1000s?

 

[906UP]

Are there any changes other than colours and bold new graphics for the 2024 P1000s?

Nope

 

[Remington]

From what I can tell nothing has changed from 2023 (or 2022). Are there any changes other than colours and bold new graphics for the 2024 P1000s?

And your first clue?

Its Honda!

 

[906UP]

Look at it this way.... one of the biggest reasons Hondas are so reliable, they don't change for the sake of change, they refine. If it works don't fix it!

 

[sheamus]

Nope

Well atleast there is a thread that confirms it now.

 

[JACKAL]

I just noticed that the 2024 P1000 models are up on Honda's site. I found the press release: 2024 Honda Pioneer 1000 Features & Benefits.

I searched the forums, for a breakdown, but could only find mention of the 2024 700's, and of competitor's 2024 models. From what I can tell nothing has changed from 2023 (or 2022). Are there any changes other than colours and bold new graphics for the 2024 P1000s?

Much of the notable recent changes were done for 22 & 23 model years, no changes beyond color options for 2024 models.

 

[tbaker]

When is Honda going to start making the roll cage like everybody else. With the indentation in roll cage so everything will fit tight like the Polaris and Can-Am roll cage’s do. It would be nice if the windshield and the hard panel doors would fit better and seal off. I don’t think Honda will ever put air conditioning in the pioneer 1000 because of these problems and especially the cost.

 

[JACKAL]

When is Honda going to start making the roll cage like everybody else. With the indentation in roll cage so everything will fit tight like the Polaris and Can-Am roll cage’s do. It would be nice if the windshield and the hard panel doors would fit better and seal off. I don’t think Honda will ever put air conditioning in the pioneer 1000 because of these problems and especially the cost.

My best guess is never. That's as a Honda owner since 1974.

 

[Remington]

Well atleast there is a thread that confirms it now.

Have u bought anything yet?

 

[Jerryg]

Yamaha has a new 1000X2 Wolverine....................................with bold new graphics to boot.

 

[ChadD]

Yamaha has a new 1000X2 Wolverine....................................with bold new graphics to boot.

And boyfriend and rainbow crocs 🙄🦩🤣.

I'd rather have crooked muffler and a hot seat 🤪

#NOMO
#NTC 😎

 

[StewB]

Bold new graphics are something I've discussed before, and slam-shifting a 5-speed Honda Accord was pretty cool . . . in 1985.

I recently picked up my 2021 P1k5 LE from the dealer after yet another week in the shop, under warranty, and was told that being in or out of turf mode isn't always shown on the display, and they don't think the i4-wd front-end rattle is a problem (third time for that one) -- and they charged me +$150 for an oil change which has always been difficult on Pioneers but is worse when you have the LE with skid plates.

As I waited for my rig to come out, I saw a guy strapping his Kawi Teryx 4 1000 on his trailer and I had - stirrings. Yes, stirrings.
On my prior Teryx 4, I brought it to the shop for the break-in work and easily maintained it after that -oil changes, gear oil, and fluid flushes.
Stirrings.

 

[sheamus]

Have u bought anything yet?

Sadly no. We just finally bought a hobby farm 3 weeks ago, which was part of the reason for getting the p1k.... make that my justification for getting one. . It's a long story, but finding the right place took about 1.5 years longer than I thought.

All of a sudden I have a bunch of things around here to fix, so I suspect I will be just a lurker here for another year. . Oh well, hopefully in that time Honda gets their supply chain figured out.

 

[JACKAL]

Sadly no. We just finally bought a hobby farm 3 weeks ago, which was part of the reason for getting the p1k.... make that my justification for getting one. . It's a long story, but finding the right place took about 1.5 years longer than I thought.

All of a sudden I have a bunch of things around here to fix, so I suspect I will be just a lurker here for another year. . Oh well, hopefully in that time Honda gets their supply chain figured out.

Once you get the Pioneer 1000 squared away, no hobby farm is complete without a Kubota MX series 55-65 HP tractor and loader

Tractors

I bought a 21 Kioti DK5510 55 HP last Friday w/ front end loader and brush hog. I've got a 1951 Ford 8N that I've been using for years, time to upgrade and I did. This is my first modern tractor, my first question is, how does this exhaust regeneration system work? It doesn't use DEF fluid and...

hondasxs.com

 

[Remington]

Sadly no

hopefully in that time Honda gets their supply chain figured out.

Seriously? 🤣 Pretty much as good as its gonna get at this point and for the foreseeable future as long as the libs are running the show.
Honda have less issues pumping them out now. They just need better workers in production like the rest of us!
Its called FJB.
Just go out and but a rig already!
Its been over 2 yrs! 🤦‍♂️

 

[sheamus]

Once you get the Pioneer 1000 squared away, no hobby farm is complete without a Kubota MX series 55-65 HP tractor and loader

We did buy a 35HP Bobcat CT2035 which is part of the reason we haven't bough the SxS. It should be paid off by spring, then going to look at a P1K again. But right now expenses are piling up.