P1000 Cab hard back interference

[Hawk53]

Has anyone had an issue with the cab hard back interfering with the box lifting and lowering. The box rubs on the back. 2018 1000 P3.

 

[Admin]

 

[Ohio4x4]

Has anyone had an issue with the cab hard back interfering with the box lifting and lowering. The box rubs on the back. 2018 1000 P3.

Mine does this slightly but it hasn't been an issue for me yet.

 

[0860silverado]

Has anyone had an issue with the cab hard back interfering with the box lifting and lowering. The box rubs on the back. 2018 1000 P3.

Yes. I put a few stainless washers on the bolts between the front plastic bed interior panel and the bed frame. Got it far enough away where it clears the rear window panel. Stupid Honda accessory dept oversight.

 

[Hawk53]

Yes. I put a few stainless washers on the bolts between the front plastic bed interior panel and the bed frame. Got it far enough away where it clears the rear window panel. Stupid Honda accessory dept oversight.

 

[Hawk53]

Yes. I put a few stainless washers on the bolts between the front plastic bed interior panel and the bed frame. Got it far enough away where it clears the rear window panel. Stupid Honda accessory dept oversight.

Thanks for the responce. Just wanted to make sure it was common problem before modifying

 

[JLH]

I took a belt sander to the bed plastic and got clearance that way.

 

[Lady01]

Yes my P1K3 does this also... shimming and modifying the bed is clever... I will look at both. Great suggestions.