P500 Can Am wheels on Pioneer 500

[exphoneman]

Just bought a leftover 2019 about a month ago and the farkling has already begun. Got a question as to whether or not a set of wheels from a Can Am Defender will fit on my 500. If I am correct I can get the adapters from RB3. Anyone have any answers ? Thanks in advance.

 

[906UP]

They may with the right adapter, the P5 is a 4x110mm bolt pattern, the Canned-Ham is 4x137mm.

 

[lee]

I thought I saw somthing similar but putting p1k wheels on a p500.
P1k and canned ham have a similar bolt pattern.
@RB3offroad

 

[RB3offroad]

Just bought a leftover 2019 about a month ago and the farkling has already begun. Got a question as to whether or not a set of wheels from a Can Am Defender will fit on my 500. If I am correct I can get the adapters from RB3. Anyone have any answers ? Thanks in advance.

Can Am Defender is a 4/137 and the P500 is a 4/110. The Honda 1000 spacers will fit the Can Am.

 

[exphoneman]

I just measured the back spacing on the rims -- fronts and rears comparatively between the stock wheels and the can am wheels.
The backspacing is about 3/8 inch more on the can am wheels so it looks like I could go with the 1 1/2 inch adapters and gain just a little over 2 inches in extra with.
The fronts tires are 27 x 9 x 14 and the rears are 27 x 11 x 14.
Is 2 inches of extra width going to be enough or should I just spring for new rims ?