Can someone give a guy a hand

[Trex1000r]

I can't remember for the life of me where to get the oil filter orings including the dct and drain plug washers I purchased 6 that had everything together! I guess sometimers is hitting me 🤣🤣🤣

 

[Admin]

 

[CID]

I can't remember for the life of me where to get the oil filter orings including the dct and drain plug washers I purchased 6 that had everything together! I guess sometimers is hitting me 🤣🤣🤣

Can't help with where you got them but I'll reuse 'em until I get leakage. The 'crush' washers aren't crush washers like the old daze (when they really crushed), they're just flat alum. washers that are softer than the bolt so they 'conform' when tightened.

 

[Bmurray]

mine came with the kits. I think it's a waste and would just reuse them like @CID mentioned.

 

[PaulF]

I can't remember for the life of me where to get the oil filter orings including the dct and drain plug washers I purchased 6 that had everything together! I guess sometimers is hitting me 🤣🤣🤣

Like others have said here, I have used the original factory ones for 3 oil changes (3000+ miles) and the oil filter O Ring just started to seep (collects a tiny bit of dust after a ride). None of the drain washers leak. Since the filter O Ring leaks, I will change all of them next service and be good for another 3000 miles.

That said, if you really need them...

Your local dealer if you need them fast (but expensive).
Rocky Mountain ATV/MC if you need other items totaling $75 or more so you can get free shipping.
Ron Ayres has good prices and reasonable shipping.

91301-107-000 Oil filter O Ring (75X2.5)
91302-PA9-003 DCT filter O Ring (39.8X2.2)
94109-12000 Small Washer (12 MM)
94109-14000 Large Washer (14 MM)

 

[Trex1000r]

Thank you all!! Just like to keep some on hand 7000 miles and no major problems so far !!

 

[jackw13]

Not trying to hijack thread, but looking for a mechanic in the phoenix or peoria area to replace the right rear wheel bearing on my 2020 talon r. The machine has 4200 miles on it.

 

[DRZRon1]

Not trying to hijack thread, but looking for a mechanic in the phoenix or peoria area to replace the right rear wheel bearing on my 2020 talon r. The machine has 4200 miles on it.

Do u think u can get the hub off?

If so - any local garage would be more than happy to press out the old bearing and press the new one in for a few bucks ?

 

[jackw13]

Thanks for the reply. I am not able to do much currently , my arm is about 8 months away from working. I have most tools, but no press.

 

[Hometeam]

Not trying to hijack thread, but looking for a mechanic in the phoenix or peoria area to replace the right rear wheel bearing on my 2020 talon r. The machine has 4200 miles on it.

We just bought the entire oem hub and it comes with a new bearing. I didn’t think the cost of the entire hub was all that much more expensive compared to buying a new bearing and getting it pressed in since I didn’t have a press either. I will get a bearing pressed in later and use as a spare.

 

[jackw13]

I can buy the parts, and pay someone to do the work. My arm is not working do to shoulder replacement. My warrenty is good till 10-25. The dealer by me is terrible. To replace a muffler unde warrenty was a 8 long weeks.

 

[SLOWPOKE693]

I can buy the parts, and pay someone to do the work. My arm is not working do to shoulder replacement. My warrenty is good till 10-25. The dealer by me is terrible. To replace a muffler unde warrenty was a 8 long weeks.

Give Pease Custom Performance a call, they will take care of you.

 

[jackw13]

Thankyou Slowpoke693, I will do that .

 

[SLOWPOKE693]

No problem.

 

[Hello_Darkness]

I can buy the parts, and pay someone to do the work. My arm is not working do to shoulder replacement. My warrenty is good till 10-25. The dealer by me is terrible. To replace a muffler unde warrenty was a 8 long weeks.

Just an FYI, wheel bearings wouldn't be warrantied. Their considered a wear item.

 

[jackw13]

I had my left rear bearing replaced and honda warrantied it. They ripped the rubber boot around the ball joint and so I had to go back a day latter and have that replaced. The time spent wasn't worth the money saved , having warranty do it. I called honda direct and made sure what would be covered and what was a wear item. They do drag their feet doing warranty work.

 

[Hello_Darkness]

I had my left rear bearing replaced and honda warrantied it. They ripped the rubber boot around the ball joint and so I had to go back a day latter and have that replaced. The time spent wasn't worth the money saved , having warranty do it. I called honda direct and made sure what would be covered and what was a wear item. They do drag their feet doing warranty work.

I haven't ever had them ok wheel bearings, guess it's who you talk to.

 

[jackw13]

I called honda service , phone # on my honda ex. warranty card.

 

[jackw13]

On a seperate question , what bushing kit is used for the rear swing arm ? Superatv said their bushing only fit front swing arms.
Thanks for all the replies .