P1000 Coolant Hose Snorkel Mod

[K9Paco]

Those that have done this, did you trim the pre-filter any? The filter keeps getting sucked halfway down the hose when I road test it. Can I trim it so that it’s not so compressed? I can get a UNI filter but I’ll need something for Saturday.

h


Sent from my iPhone using Tapatalk

 

[Admin]

 

[knuckledeep]

Those that have done this, did you trim the pre-filter any? The filter keeps getting sucked halfway down the hose when I road test it. Can I trim it so that it’s not so compressed? I can get a UNI filter but I’ll need something for Saturday.

View attachment 81440h


Sent from my iPhone using Tapatalk

get a pair of pantyhose and stick over the end then insert the pre filter and zip tie it to the tube

 

[ofrcboy]

Haven't seen this modification but looks interesting. how would the little woman's panty hose stretched over
the tube work?

 

[knuckledeep]

put it over the end nice and tight or push it in the tube a little with the prefilled and it will hold the pre filter in place

 

[ofrcboy]

That's what she said "put it over the end". Sorry couldn't resist

 

[K9Paco]

put it over the end nice and tight or push it in the tube a little with the prefilled and it will hold the pre filter in place

Thanks a lot knuckle.


Sent from my iPhone using Tapatalk

 

[knuckledeep]

no problem here to help

 

[Hondasxs]

I trimmed mine to fit and it disappeared. Found it in the air box.


Sent from my HTC6545LVW using Tapatalk

 

[K9Paco]

Part of my concern was air flow through the filter. I don’t want to choke off the air flow by compressing the filter.


Sent from my iPhone using Tapatalk

 

[Hondasxs]

Here Stealth Snorkel Examples - Honda Pioneer 1000 you can see they ran a small retaining rod through to hold it in.
Post #7

Sent from my HTC6545LVW using Tapatalk

 

[K9Paco]

I thought of doing that also.


Sent from my iPhone using Tapatalk

 

[BigOL3]

Stick the filter into the end of pipe, drill about 4 screws thru pipe and into the filter. That should hold it in place.

 

[K9Paco]

Stick the filter into the end of pipe, drill about 4 screws thru pipe and into the filter. That should hold it in place.

Going to Sabine tomorrow so I might go ahead and trim the filter and do this. Thanks.


Sent from my iPhone using Tapatalk

 

[jge3]

could run a couple pieces of wire or small rope like fishingline through the hose in a x pattern at the bottom of the prefilter

 

[Spoof0ne]

Those that have done this, did you trim the pre-filter any? The filter keeps getting sucked halfway down the hose when I road test it. Can I trim it so that it’s not so compressed? I can get a UNI filter but I’ll need something for Saturday.

View attachment 81440h


Sent from my iPhone using Tapatalk

HI K9Paco,

This looks nice and simple. What was your parts list for it ie. size of the coolant hose and did it come bent in that angle?

 

[K9Paco]

HI K9Paco,

This looks nice and simple. What was your parts list for it ie. size of the coolant hose and did it come bent in that angle?

It comes pre bent. I also went and got a hose clamp to make sure it stayed in place. I took the pre-filter and trimmed the corners also. I had to put some screws through the hose to keep the filter from being sucked in.




Sent from my iPhone using Tapatalk

 

[Tramguage1]

I replaced the pre filter with this.

 

[Chriscoe]

I’m having a hard time putting the hose on. Any tips?


Sent from my iPhone using Tapatalk

 

[K9Paco]

I’m having a hard time putting the hose on. Any tips?


Sent from my iPhone using Tapatalk

Bring it in the house to warm up for a couple of hours. It should become more pliable and expand better.


Sent from my iPhone using Tapatalk

 

[Chriscoe]

Bring it in the house to warm up for a couple of hours. It should become more pliable and expand better.


Sent from my iPhone using Tapatalk

Good idea. This thing is pita


Sent from my iPhone using Tapatalk