P1000 fenders

[hoghead76]

So much for the grand kids slide. going to made fender flares to help with the mud coming in
have an old conveyor belt, this is what i came up with so far. more pics later

 

[Admin]

 

[BigOL3]

What did you use for the metal strip that is holding up the conveyor belt?

 

[alloutdoors]

You have to give blood on any good home project

 

[hoghead76]

What did you use for the metal strip that is holding up the conveyor belt?

Screwed the slide peaces to the one inch runner on bed then use
clips to hold the conveyor belt to that. The belt has enough flex
it will bend and not tear off and stay ridge to hold its shape.

 

[hoghead76]

MORE FENDER PIC
got the left side done also

the front fender are next

 

[hoghead76]

Screwed the slide peaces to the one inch runner on bed then use
clips to hold the conveyor belt to that. The belt has enough flex
it will bend and not tear off and stay ridge to hold its shape.

Guess need to be a little clearer the green peace that the conveyor belt is attached to
is the slide I cut up, use heat gun to help shape it.

 

[hoghead76]

Found time to get the front fenders done.
this should help some with the mud,wife gets tried of getting
mud out of her hair.
Told her to wear her helmet but all I got was THE LOOK

 

[O2bsmitty]

Looks good. I've been wanting to add flares but haven't really looked into it too much.

 

[hoghead76]

Looks good. I've been wanting to add flares but haven't really looked into it too much.

The conveyor belt works good it flexes when you kiss a tree or go thru a tight gate.