P700 Frontline acp 28/10/14 on stock lift?

[fincityfl]

Hello All,
Does anyone run these tires on their stock lift Pioneer 700-2 deluxe? Do they rub in any way? Or please tell me what tire size you have if you are running larger than stock tires with stock lift.

2019 Honda 700-2 Deluxe stock

Thanks in Advance!!

 

[WagginTail]

I'm running 28x10 itp blackwaters on 14" wheels with a 5+3 offset. I had to get strongmade lift and install spring spacers on the front shocks. Front tires still rub a little on the floorboard when shock is fully compressed and wheel is turned. I was told maybe they wouldn't rub if my wheel offset was 5+2.

 

[WagginTail]

Looks like a lot of people are running 27x10 on 12" wheels with 5+2 offset and no lift

 

[fincityfl]

I'm running 28x10 itp blackwaters on 14" wheels with a 5+3 offset. I had to get strongmade lift and install spring spacers on the front shocks. Front tires still rub a little on the floorboard when shock is fully compressed and wheel is turned. I was told maybe they wouldn't rub if my wheel offset was 5+2.

Thanks for the info. I was thinking of at least staying with the 28/8/14 up front and 28/10/14 in the back because that's the stock width up front. That at least might help without the offset for the inside rub. But I'm sure it will still rub a little on the floor board when the shock fully decompresses.
.

 

[WagginTail]

Thanks for the info. I was thinking of at least staying with the 28/8/14 up front and 28/10/14 in the back because that's the stock width up front. That at least might help without the offset for the inside rub. But I'm sure it will still rub a little on the floor board when the shock fully decompresses.
.

Yea that might help. I went with 10" wide all the way around so I could rotate them.