P500 Home made front reciever hitch.

[Glazer]

I have been needing a front hitch to make it easier to back in my trailers, but was not able to buy one.
so I made one out of steel I already had. I used the stock mounting holes from the KFI winch mounting bracket that bolts to the push bar. I can also use my cargo carrier during hunting season to transport the deer and bears out of the woods. if any one has any questions or needs any measurements so they can make one for themselves, I will be happy to help.

 

[Chooglin]

Nice work , that should be pretty handy!

 

[hondabob64]

I’ve been looking up supplies for that very project today! Was planning on attaching a solid plate to mount it to the inner frame down tubes but yours looks sturdier.

 

[Glazer]

I’ve been looking up supplies for that very project today! Was planning on attaching a solid plate to mount it to the inner frame down tubes but yours looks sturdier.

Thank you.

I tried it out today and it sure does make it easier to maneuver my trailers around the yard. 200 lb trailer tongue weight was nothing for the P5.

 

[Montecresto]

I have been needing a front hitch to make it easier to back in my trailers, but was not able to buy one.
so I made one out of steel I already had. I used the stock mounting holes from the KFI winch mounting bracket that bolts to the push bar. I can also use my cargo carrier during hunting season to transport the deer and bears out of the woods. if any one has any questions or needs any measurements so they can make one for themselves, I will be happy to help.

View attachment 147842 View attachment 147843 View attachment 147844 View attachment 147845

Very cool. Become a vender, I’ll take the first three.

 

[KYhillbilly]

Very nice, may have to try and make one myself.

 

[hondabob64]

I’m gonna insert a hitch hauler & use it to load deer on with the winch.