W
Was going to get started on these yesterday afternoon but couldn't come up with the instructions for the 700 models. (Special thanks to @lee for coming through) As it was I didn't get finished till way late.
Anyway, here's my official manstructions.
When removing the front grill make sure to remove the 2 screws that secure the top of the headlight buckets to the underside of the fender. Kinda hard to get to. And don't forget the wiring harness plug.
Instructions say to remove bumper, manstructions say it's not required.
The heft of the led's compared to the stockers is quite noticeable when you hold them.
When putting the black caps on the leds note the flat side & position the caps accordingly.
Here's the plug the relay goes into. Instructions say to remove left fender, manstructions say waste o' time.The switch wiring plug will also pass right through the band holder.
These are a great addition to the 700 but I'm still planning on adding a bar & cubes because more light makes right.
Anyway, here's my official manstructions.
When removing the front grill make sure to remove the 2 screws that secure the top of the headlight buckets to the underside of the fender. Kinda hard to get to. And don't forget the wiring harness plug.
Instructions say to remove bumper, manstructions say it's not required.
The heft of the led's compared to the stockers is quite noticeable when you hold them.
When putting the black caps on the leds note the flat side & position the caps accordingly.
Here's the plug the relay goes into. Instructions say to remove left fender, manstructions say waste o' time.The switch wiring plug will also pass right through the band holder.
These are a great addition to the 700 but I'm still planning on adding a bar & cubes because more light makes right.