Lug nut size?

[Isuat960]

Bought a used 2016 700-4 and am replacing tires/wheels and can't find stock lug nut size in the manual or on the forum so I can remove them?

I have a 18mm and a 3/4" on my 4-way, both of which are slightly too big.

Anyone know, are they 16mm?

Sent from my SM-N981U using Tapatalk

 

[Admin]

 

[JenElio]

Do you have a socket set handy?
Maybe 17mm ??? Don't know much about the 700 sorry....

 

[Hondasxs]

LOL.. NOTHING is 18mm, 16, 15, 13, 11, 9, 7 or 5mm. Throw all those away.
It's either 17, 14, or spline.
You may need a thin wall socket depending on the wheel.

 

[Isuat960]

Honda is several hrs away from me in a remote area and need to buy a new socket set on the way, thought I could get some helpful direction on metric vs standard and size

Sent from my SM-N981U using Tapatalk

 

[Hondasxs]

All Metric,
With the following, you can almost take the whole machine apart.
8, 10, 12, 14, 17, 19, 30.
and 2 sizes of hex bits... (i forget the sizes needed).

 

[Hondasxs]

Just hope they are not splined...
You will need a splined socket.
Sorry, I don't know the size.

 

[Mudwing]

Bought a used 2016 700-4 and am replacing tires/wheels and can't find stock lug nut size in the manual or on the forum so I can remove them?

I have a 18mm and a 3/4" on my 4-way, both of which are slightly too big.

Anyone know, are they 16mm?

Sent from my SM-N981U using Tapatalk

I use a 17mm socket for the lug nuts. 😎

 

[Ugly]

All Metric,
With the following, you can almost take the whole machine apart.
8, 10, 12, 14, 17, 19, 30.
and 2 sizes of hex bits... (i forget the sizes needed

 

[BigMac]

My 2006 Pioneer is 19 mm wheel lug nut. Just change it again.

 

[Neohio]

All Metric,
With the following, you can almost take the whole machine apart.
8, 10, 12, 14, 17, 19, 30.
and 2 sizes of hex bits... (i forget the sizes needed).

4mm and 5mm hex if anyone is reading.
1000 only. Not sure about 500/520/700/Talon