P1000 More Tires - Just One Simple Question

[HBarlow]

I'm still struggling with the tire issue. I've received numerous helpful ideas and suggestions in the threads and in pm's and appreciate all of them.

My main concern is tire noise because I only drive my P1k-3 on blacktop paved roads.

My preferred solution is a set of four Tensor Regulator tires in size 28/10x14 on a set of OEM Honda Deluxe 14" wheels.

Not necessarily from the vendor in this link:

Amazon.com: Full set of Tensor Regulator A/T (8ply) 28x10-14 DOT ATV Tires (4) : Everything Else

Amazon.com: Full set of Tensor Regulator A/T (8ply) 28x10-14 DOT ATV Tires (4) : Everything Else

www.amazon.com

I've been told by a vendor that I can mount these tires on my Honda Deluxe 14"w heels but I want to hear it from one of you who has done it successfully or did not do it due to a reason I am not aware of.

I'd like to hear from members. Please offer your experience and opinions.

 

[Admin]

 

[Hondasxs]

Yes, I have run 28x10x14 on factory rims for years.
However, you should add 1" rear spacers to even out the track.

1" Honda Pioneer 1000 Wheel Spacers

HONDA PIONEER 1000 BILLET WHEEL SPACERS

rb3offroad.com

 

[HBarlow]

Yes, I have run 28x10x14 on factory rims for years.
However, you should add 1" rear spacers to even out the track.

1" Honda Pioneer 1000 Wheel Spacers

HONDA PIONEER 1000 BILLET WHEEL SPACERS

rb3offroad.com

Great! Thanks. Could you post a photo?

Edit: I didn't look at the link before I responded. I'll order the spacers now.

 

[CID]

Since you’re always on pavement, have you considered the BFGoodrich K02? Oops, my bad, may not be available in 28”.

BF Goodrich KO2 on a Talon?

I am wondering if anyone has run the KO2s on a Talon? Yes, I know about the UTV specific KM3s, but they are not DOT approved. I am in AZ, my new Talon 1000R is street legal, and I need DOT tires. I think these tires should do pretty well in the terrain that I run, which is mostly sand, rocks...

hondasxs.com

 

[HBarlow]

Since you’re always on pavement, have you considered the BFGoodrich K02? Oops, my bad, may not be available in 28”.

BF Goodrich KO2 on a Talon?

I am wondering if anyone has run the KO2s on a Talon? Yes, I know about the UTV specific KM3s, but they are not DOT approved. I am in AZ, my new Talon 1000R is street legal, and I need DOT tires. I think these tires should do pretty well in the terrain that I run, which is mostly sand, rocks...

hondasxs.com

Not necessarily an oops. I'm just learning I can mount a set of four same-size tires on my Pioneer Deluxe wheels.

28x10x14 is the only 14 tire offered by Tensor in the Regulator tire. I could also consider a BFGKO2 if offered in a similar size.

I'll look at the BFG to learn sizes offered.

 

[HBarlow]

I looked at BFG tires. Only one size offered in 14" BFG KO2. It's narrow.

I like BFG tires and would buy them if more sizes were available in 14".

 

[HBarlow]

Does anyone have photos of 28x10x14 Tensor Regulators on a P1K? I'd like to see a photo before I order.