P700 New Project

[Cdaily3]

Well I guess I’ll start a build thread. I bought a 202 Pioneer 700-4 about two months ago now, since then purchased a Honda Hard roof, fog lights, XTC turn signal, horn kit and Led lighted license plate holder ( installing license plate holder this week ) , mirrors, a set of 28 x 10 x 14 tusk terrabites with ITP steel wheels, and ordered a wind shield which I’ll install this week also. Much more to come lol my wife is going to hate me

 

[Admin]

 

[Smitty335]

Well I guess I’ll start a build thread. I bought a 202 Pioneer 700-4 about two months ago now, since then purchased a Honda Hard roof, fog lights, XTC turn signal, horn kit and Led lighted license plate holder ( installing license plate holder this week ) , mirrors, a set of 28 x 10 x 14 tusk terrabites with ITP steel wheels, and ordered a wind shield which I’ll install this week also. Much more to come lol my wife is going to hate me

View attachment 215349 View attachment 215350 View attachment 215351 View attachment 215352 View attachment 215354 View attachment 215355

Very nice!

 

[03mossy]

Looking good! Man I like the looks of those tires!

 

[Cdaily3]

Ya I only have a weekend on the tires and love the extra clearance ( finally got to go on a jeep trail where they were def needed) but can 100% feel the lack of power with them over the stocks on steep climbs with more than two people in the machine.

 

[03mossy]

Is the reduction in power enough to make you regret going with 28”s?

 

[Cdaily3]

If I have just two people then no I’m glad I got them, but I just have to be picky now of where I go if I have 4 adults in the machine.

The tires I got are 8 ply so wondering if 6 ply being lighter would help.

 

[gullyjumper]

Your off to a really good start !

 

[Mopower58]

Welcome from Mississippi. Nice looking ride.

 

[FeelinRecless]

I like the position of your switches. Been wondering where to put some without cutting in a big plate.

 

[Cdaily3]

Ya I wasn’t sure where to put them either. I wasn’t ready to do a big switch plate either so that was my solution. I also hid the fog light switch in the glove box so I could plug it later on once I do a switch plate on the dash

 

[Cdaily3]

Made a bracket for my LED license plate holder today turned out pretty good

 

[livefromthetree]

Man thats a good looking ride!

 

[Cdaily3]

Quick shot of how I mounted my license plate

 

[Cdaily3]

Got a super ATV flip up windshield and installed it today. Only issues I ran into are I had to trim the center portion of my roof slightly for it to clear at full opening, and when full closed the edges do seal completely. Other than that I’m pretty happy with it!

 

[Smitty335]

Got a super ATV flip up windshield and installed it today. Only issues I ran into are I had to trim the center portion of my roof slightly for it to clear at full opening, and when full closed the edges do seal completely. Other than that I’m pretty happy with it!

View attachment 217455 View attachment 217456

I like mine in the rain, I despise how the lower windshield fits to the hood, it's terrible. I bought it because of @pilgram griping at me in CO last year, when he rode with me. Won't be going to CO this year, so will be removing the split windshield and reinstalling the Kolpin shortie, a lot better windshield when it's not raining/hailing.

 

[Cdaily3]

@Smitty335 has it been ok hauling with it installed? I haul my pioneer in the back of my truck and wondering how it holds up at 65/70 mph on the freeway

 

[Cdaily3]

Two updates, got the Pioneer 1000 front springs all the way around and gained about 1.5” of lift and and a huge difference in ride quality and no more bottoming out the shocks or rubbing on full compression in the rear. Overall super pleased but did notice with the harder springs I have a little bit less articulation on which ever side compresses but well worth the the other benefits. Secondly I added a spare tire mount it’s the mod quad universal.

 

[Alan_Vander]

Two updates, got the Pioneer 1000 front springs all the way around and gained about 1.5” of lift and and a huge difference in ride quality and no more bottoming out the shocks or rubbing on full compression in the rear. Overall super pleased but did notice with the harder springs I have a little bit less articulation on which ever side compresses but well worth the the other benefits. Secondly I added a spare tire mount it’s the mod quad universal.

View attachment 220736 View attachment 220737 View attachment 220738 View attachment 220739

I like that spare tire carrier where did you get it from?


Sent from my moto z4 using Tapatalk

 

[Cdaily3]

The spare tire carrier came from mod quad if I remember correctly

 

[Cdaily3]

Got around to installing a winch today