No brake lights but i have tailights

[msr123]

I have a 2022 honda talon 1000r and I currently don't have brake lights I have tail lights.
6 months ago I did put it a turn signal kit that was plug and play and everything worked just fine. I recently just replayed my brake switch and thar didn't solve the issue. I have also adjusted my brake switch and that did not work. Any help would be greatly appreciated.

 

[Remington]

I have a 2022 honda talon 1000r

Welcome from the commie state of Michigan!

First things first when u join/first post so we know your not a Poo Poo Infiltrator tryin to mess with us!
Post pics of your rig!
Pics Or It Didnt Happen!

while we wait for those pics, check your fuses with a multimeter on ohms and not the tone. physically check them with the meeter and look at them even change them they are cheep. Have had Alot of fuses lately that look good and were actually bad. Also what brand turn signal kit?

 

[Red500]

Fuses and relays is where I'd start.
Welcome to the club from East Tennessee.

 

[Neohio]

Disconnect the turn signal kit and see if you have working lights.
Could be many things.
Faulty light assemblies, faulty TS light controller, bad wiring somewhere.
How did you diagnose a faulty brake switch?

 

[msr123]

Disconnect the turn signal kit and see if you have working lights.
Could be many things.
Faulty light assemblies, faulty TS light controller, bad wiring somewhere.
How did you diagnose a faulty brake switch?

I have disconnected it and that wasn't the issue. I started adjusting my brake switch and when I did that sometimes it would take put my tail lights so for 18 bucks that's where I started.

 

[Remington]

I started adjusting my brake switch and when I did that sometimes it would take put my tail lights so for 18 bucks that's where I started.

Why where u adjusting the brake switch?
And what is the last part your saying? I dont speak Japanese! 🤣

Wheres the pics? 🤔

 

[msr123]

Why where u adjusting the brake switch?
And what is the last part your saying? I dont speak Japanese! 🤣

Wheres the pics? 🤔

You can tighten or loosen the brake switch, so I tried that, 18 bucks is what a brake switch cost.

 

[Neohio]

Do you have a service manual?
Disconnect the TS convertor at the back. Check the Honda wiring for signal when brakes are applied.
If signal is there, remove TS convertor and plug Honda wiring back in.

If your turn signals currently work. Everything from the TS convertor back is working correctly.

Talon lights are 3 wires.
Ground
Running light
Brake light (also turn signal)

 

[Scoop]

And what is the last part your saying? I dont speak Japanese!

What, you never "take put" anything on your SXSs? 🤣

(He was just futzin around with you, @msr123)

 

[msr123]

What, you never "take put" anything on your SXSs? 🤣

(He was just futzin around with you, @msr123)

It was supposed to say "take out" not "take put" geez my bad

 

[Red500]

It was supposed to say "take out" not "take put" geez my bad

You'll have to forgive them, we love to bust peoples chops around here. But we mean well.

 

[Scoop]

You'll have to forgive them, we love to bust peoples chops around here. But we mean well.

Forgive them?

Does @Remington have a mouse in his pocket?

 

[Remington]

You can tighten or loosen the brake switch, so I tried that, 18 bucks is what a brake switch cost.

View attachment 394780

Nice buggy. Is that gray or black?

 

[Remington]

It was supposed to say "take out" not "take put" geez my bad

Thought so but you never know nowadays 🤷‍♂️

 

[msr123]

Nice buggy. Is that gray or black?

Thanks! It's flat black with gray decals

 

[Remington]

Thanks! It's flat black with gray decals

That flat black is nice

 

[msr123]

It would be a lot nicer if it was gloss. The flat black is a little harder to fet clean

 

[Remington]

It would be a lot nicer if it was gloss. The flat black is a little harder to fet clean

View attachment 394815

Oh yeah I bet. Is that a custom cage you put on there?

 

[msr123]

Oh yeah I bet. Is that a custom cage you put on there?

No it's stock. It just has the intrusion bar put on.