BOX1

P1000m5 P1000-5 HD steering box sizing question

Seadonist

Seadonist

Well-Known Member
Feb 8, 2021
384
1,142
93
New Orleans
Ownership

  1. 1000-5
My inner tie rod snapped at the threaded bolt that links into the steering box and instead of trying to get it out I’m considering just upgrading to your HD steering box. I noticed that there are different sizing and turn ratio options. I need guidance on which to go with on my 2021 P1000-5. I have 4” portals with a 15% gear reduction and 30” Intimidator tires. Thanks


Sent from my iPhone using Tapatalk
 
TripleB

TripleB

Well-Known Member
Lifetime Member
Aug 13, 2018
11,597
98,314
113
Caryville, Tennessee
Ownership

  1. 1000-3

  2. 1000-5
My inner tie rod snapped at the threaded bolt that links into the steering box and instead of trying to get it out I’m considering just upgrading to your HD steering box. I noticed that there are different sizing and turn ratio options. I need guidance on which to go with on my 2021 P1000-5. I have 4” portals with a 15% gear reduction and 30” Intimidator tires. Thanks


Sent from my iPhone using Tapatalk
Just curious if it was OEM tierods or superatv?
 
  • Like
Reactions: Plowboy1466
TripleB

TripleB

Well-Known Member
Lifetime Member
Aug 13, 2018
11,597
98,314
113
Caryville, Tennessee
Ownership

  1. 1000-3

  2. 1000-5
My inner tie rod snapped at the threaded bolt that links into the steering box and instead of trying to get it out I’m considering just upgrading to your HD steering box. I noticed that there are different sizing and turn ratio options. I need guidance on which to go with on my 2021 P1000-5. I have 4” portals with a 15% gear reduction and 30” Intimidator tires. Thanks


Sent from my iPhone using Tapatalk
@RB3offroad
 
Seadonist

Seadonist

Well-Known Member
Feb 8, 2021
384
1,142
93
New Orleans
Ownership

  1. 1000-5
Just curious if it was OEM tierods or superatv?

SATV HD tie rod, snapped inside the steering rack. I went ahead and ordered the RB3 14mm, 1:1 ratio rack and the TTC stage 2 HD Heim 14mm tie rods this time.


Sent from my iPhone using Tapatalk
 
TripleB

TripleB

Well-Known Member
Lifetime Member
Aug 13, 2018
11,597
98,314
113
Caryville, Tennessee
Ownership

  1. 1000-3

  2. 1000-5
SATV HD tie rod, snapped inside the steering rack. I went ahead and ordered the RB3 14mm, 1:1 ratio rack and the TTC stage 2 HD Heim 14mm tie rods this time.


Sent from my iPhone using Tapatalk
I think superatv had a bad run of inner tie ends. I snapped both of mine. You could tell they were defective but the inner only has a 6 month warranty. I just put them on for 1 week and my machine went down for 6 months because of torn a-arm tabs. First ride when I got it back for the takeover, snapped the driver side. 1 week later snapped the passenger side. They wanted to charge me $42 for replacement inner tie rods. So I just threw my junk ass $200 tie rods in the trash and ordered the updated OEM tie rods and haven't bent or broke one in around 1,800 miles.
 
TripleB

TripleB

Well-Known Member
Lifetime Member
Aug 13, 2018
11,597
98,314
113
Caryville, Tennessee
Ownership

  1. 1000-3

  2. 1000-5
20220617 141607
20220617 124414
20220617 153819
 

Similar threads

Sheetmetalfab
Replies
0
Views
496
RB3offroad
Sheetmetalfab
Sheetmetalfab
BOX2
box3

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!