P1000 P1000 inexpensive overhead console

[Prntckt]

I made this console for my P3. I used 1-3/4" strap mounts to anchor two 7/8" deep unistrut rails to ROPS. Installed a piece of 1/2" ABS using strut nuts to the rails. It allowed me to utilize an inexpensive console ($26) designed for a flat roof on my P3. I installed spacers above the strap mounts to get the most headroom I could get. Next project is getting the head unit and speakers, and wiring it up. Except for the strap mounts and the console, everything else were materials I had laying around in the shop.

 

[Admin]

 

[TxDoc]

Very nice work. Gives you a custom result


Sent from my moto z4 using Tapatalk