P1000 Pioneer 1000-6 Factory Accessory Switches

[Pyro3825]

Hi all. New owner of a 1000-6 and had a quick question regarding switches after I couldn't find an answer here. The 1000-6 comes with three unused (I think) switches and I believe they are terminated with plugs in this bundle of blue tape. Is that correct? If so, can someone link the corresponding plug from the HondaSXS store that I could use to connect to them. Also, are the switches already powered or would I run power in one side and accessory out the other side of the plug? Last question is the blue tape wrapped plug on the drivers side. That is the accessory on power that I can use to turn on a solenoid correct? Thanks in advance!

 

[Neohio]

Pick from pull down menus to get what you need.

Pioneer 1000, accessory switch wire harness conversion kit.

New Product transitions the factory switches found in the new 2022+ Pioneer 1000 deluxe models to work as you would expect. From the factory, these switches are dead, unconnected, and lacking. Honda provides no power or accessories to connect to these. They do NOT rely on or connect to the...

store.hondasxs.com

 

[HondaTech]

Only 3 amp rated so not good for much tbh.

 

[priselay]

Factory switches are not backlit unable to see in the dark...Just FYI

 

[priselay]

i would highly recommend the adaptors and install your own switches

Honda Pioneer 1000/700 Oversized Switch Adapter Honda Pioneer 1000

For 2022+ YM Pioneer 1000 owners looking to install a standard switch at any of the OVERSIZED factory switch holes will quickly find they won't fit. The base model Pioneer 1000 has 4 locations; The Deluxe has 1 location. Or for Trail and Forest owners looking to replace the factory switches in...

store.hondasxs.com