P1000m5 PNW BUILD (Pioneer 1000-5)

[P1000_DLux]

Cupholders rear doors
Quieted doors and back bed
SuperATV windshield

 

[Admin]

 

[BWAF]

Cupholders rear doors
Quieted doors and back bed
SuperATV windshield

And never stops

 

[hoghead76]

Cupholders rear doors
Quieted doors and back bed
SuperATV windshield

there will be more but it's fun to up grade as @BWAF said it never stops

 

[Russ989]

And never stops

You told the truth right there brother! 😉

 

[P1000_DLux]

 

[P1000_DLux]

Add the pics to help.
The cup holders are sweet and took 2 minutes to install
The sound dampening on the bed is great (Hose on the latches made it quiet)

The door dampening worked but made the doors hard to close so I removed that and replaced it with electrical tape, it is a 6 month fix and then has to be replaced again, a minor annoyance but it works really well.

It is dead quiet now and all I hear is the sweet sweet Pioneer purr!

 

[Isaiah]

View attachment 191811View attachment 191803View attachment 191804View attachment 191805View attachment 191806View attachment 191807View attachment 191808View attachment 191809View attachment 191810

I just got done doing my door latches it definitely made a difference

 

[elkguide]

Life is good!

We Pioneer owners are what is keeping the economy going!

 

[P1000_DLux]

No s***! I just bought the Translucent roof, a rocker switch panel to replace the warning plate, second battery with the isolator. Pictures to follow in the next week or two!

 

[Russ989]

No s***! I just bought the Translucent roof, a rocker switch panel to replace the warning plate, second battery with the isolator. Pictures to follow in the next week or two!

Just the beginning lol.

 

[RB3offroad]

rb3offroad has replacement door bushing that stop the rattle in the door and we are a member of the group!!!

 

[P1000_DLux]

rb3offroad has replacement door bushing that stop the rattle in the door and we are a member of the group!!!

View attachment 192135

Okay, so I looked at these and watched a guy on youtube put them in, do they just make the door more secure and will make the rattle go away so I won't have to have electrical tape on the latch area?

 

[Smitty335]

Okay, so I looked at these and watched a guy on youtube put them in, do they just make the door more secure and will make the rattle go away so I won't have to have electrical tape on the latch area?

They help a lot! Depends on how hard you ride! Had some guys making them out of there home shops from here, they were better than stock, but RB3 are better in my opinion. Be warned, I had two doors that I couldn't get the factory hinges to break lose from the frame with an impact, so I had to install the bushings with the hinges mounted to the frame. If you ever up grade A arms to Supper ATV, don't install the A arms until you see if the grease zerks will let you grease the A arm bushings, RB3 offload has the cure for that a well.

 

[RB3offroad]

They help a lot! Depends on how hard you ride! Had some guys making them out of there home shops from here, they were better than stock, but RB3 are better in my opinion. Be warned, I had two doors that I couldn't get the factory hinges to break lose from the frame with an impact, so I had to install the bushings with the hinges mounted to the frame. If you ever up grade A arms to Supper ATV, don't install the A arms until you see if the grease zerks will let you grease the A arm bushings, RB3 offload has the cure for that a well.

Thank You Smitty!

 

[RB3offroad]

Okay, so I looked at these and watched a guy on youtube put them in, do they just make the door more secure and will make the rattle go away so I won't have to have electrical tape on the latch area?

Yes you will be impressed! We also have a video on how to install on our website RB3 Door Bushings Video | RB3 Off Road

 

[Smitty335]

Thank You Smitty!

Dito!

 

[P1000_DLux]

Okay so I might buy a set from you guys shortly, I'm also looking at the Trail Armour a-arm guards. I don't think I will swap the stock A-arms or put spacers on, we don't actually get big mud pits and stuff like that up here in Washington. I do ride decently hard "fast" when i'm out on the trails.

 

[P1000_DLux]

Added the second battery and the rocker switch panel. Lights on the way and the shaded clear roof on the way too. I also ran two battery tender quick chargers also.

 

[Papaandhistoys]

View attachment 193075View attachment 193076View attachment 193077View attachment 193078View attachment 193079View attachment 193080View attachment 193081View attachment 193082
View attachment 193083

Added the second battery and the rocker switch panel. Lights on the way and the shaded clear roof on the way too. I also ran two battery tender quick chargers also.

Hey there friend
So, I just did my dual set up as well (from turn pro). On the tender hookup! Will charge both batteries with one hookup on the main battery or do you have to have one on each?

I hooked up to main last night and this morning the blue led was on, on the turn pro apparatus,lol. Brain fart, can’t recall the name of that thing.


Sent from my iPhone using Tapatalk

 

[TripleB]

Hey there friend
So, I just did my dual set up as well (from turn pro). On the tender hookup! Will charge both batteries with one hookup on the main battery or do you have to have one on each?

I hooked up to main last night and this morning the blue led was on, on the turn pro apparatus,lol. Brain fart, can’t recall the name of that thing.


Sent from my iPhone using Tapatalk

I hook my battery tender to the main battery and it charges both. When the isolator's blue light is on, its charging the 2nd battery.