P1000 Quick Shield

P

packer58

Well-Known Member
Jun 17, 2021
312
943
93
N. Cali
Ownership

  1. 1000-3
Well, after reading comment after comment about how well the Quick Shield works I finally purchased one from @trigger. If it works as well as everybody claims I'll be a happy man for sure. Bow season is right around the corner here in Cali and it's been hot as hell here lately.
 
P

packer58

Well-Known Member
Jun 17, 2021
312
943
93
N. Cali
Ownership

  1. 1000-3
I forgot to mention, an under seat fan helps as well.
Yes ......I have a bilge fan setting in my "THINGS TO DO " pile in the garage, need to put a mount together and get that done. When i installed my club store auto back-up / work light harness under the machine i wasn't smart enough to loom in the power for the fan while i had the skid off and was already under there .....:mad:
 
NTCPrezJB

NTCPrezJB

President of #NTC
Lifetime Member
Supporting Member
Jan 30, 2018
108,396
956,446
113
Canton, OH
Ownership

  1. 1000-5
Yes ......I have a bilge fan setting in my "THINGS TO DO " pile in the garage, need to put a mount together and get that done. When i installed my club store auto back-up / work light harness under the machine i wasn't smart enough to loom in the power for the fan while i had the skid off and was already under there .....:mad:
Sounds like something I’d do .. or not do and have to do it all again as well.
 
trigger

trigger

Old Ironsides
Vendor
Lifetime Member
Supporting Member
Feb 13, 2016
23,755
177,474
113
Bay City, Michigan
www.quickshieldutv.com
Ownership

  1. 500
Hello
Just got my quicksheild any install videos out there? or intructions?
Thanks!
Remove the seat bottom and seat back, five 10mm bolts. Remove nut for middle seatbelt. Logo goes up and forward. Slide seatbelt latches through slits in shield and fit it up the back to line up bolt holes for seat back. Put it back together.
 
advertisement
Remington

Remington

Fife! POIDH Enforcement Officer
Lifetime Member
Supporting Member
Jul 24, 2016
20,127
115,117
113
Michigan
Ownership

  1. 1000-5

  2. Talon X
Just ordered my quickshield, I already have dual fans under the seats that helps out big time but a little more shouldn’t hurt
Cool you will like it!

Question tho, Never heard of the state called Flushear? Is that a new providence of the People's Socialist Republic Of Kalifornia? 🥳
 
Dirtstiffs-1000

Dirtstiffs-1000

Well-Known Member
Lifetime Member
Supporting Member
Nov 3, 2018
1,655
6,029
113
Republican from the wet side of Oregonifornia
hondasxs.com
Ownership

  1. 1000-5
Yes ......I have a bilge fan setting in my "THINGS TO DO " pile in the garage, need to put a mount together and get that done. When i installed my club store auto back-up / work light harness under the machine i wasn't smart enough to loom in the power for the fan while i had the skid off and was already under there .....:mad:
I have some 3 wire romex laying around I use as a wire fishing tool. Works great for getting wiring front to back and through the belly pan. I think I also used a chunk to wire some lights up that way.
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!