P1000 Rim offset

[Budweiser1069]

If I buy the 4.0+3.0 for the front and 5.0+ 2.0 for the back, would it eliminate needing spacers on my 2018 pioneer 1000-5 stock. Wanting to put 28" tusk terrabites all the way around. Thanks

 

[ToddACimer]

Unless you buy 2 rear wheels with more offset and 2 front wheels with less offset you will need spacers to have the same offset front and rear. 5+2 front with 4+3 rear will be close to even assuming the back spacing is the same.

 

[Lady01]

View attachment 263920
If I buy the 4.0+3.0 for the front and 5.0+ 2.0 for the back, would it eliminate needing spacers on my 2018 pioneer 1000-5 stock. Wanting to put 28" tusk terrabites all the way around. Thanks

 

[Budweiser1069]

Thanks for the info

 

[Kasmin]

I. Agree but the 5+2 should be on the front and 4+3 should be on the back if u r using same size tire alround. If u buy 10 wide it will be about 0.6 inches wider in front than stock and 0.3 inches wider than stock in back. At least that was how it was on my pioneer 1000-3 2016

 

[russknight]

If you use spacers, and keep the wheel offset the same, it will allow you to rotate the tires without breaking them down off the wheels.

 

[Kasmin]

Good point.👍🏽

 

[russknight]

That's what I did. I'm running 15" light truck tires on 15 x 7 wheels (5+2) with a 1" or 1 1/2" spacer (can't remember) on the rears.

 

[Kasmin]

Only thing with spacers u have the added risk that they loosen up and fall off. But I guess if u use blue locktite on them it would be ok..

 

[Lady01]

Only thing with spacers u have the added risk that they loosen up and fall off. But I guess if u use blue locktite on them it would be ok..

I haven't had that issue yet after 100 miles but this is a great point... I will check mine on the next drive!

 

[russknight]

I've never had an issue with the spacers loosening and I have over 7000 miles on them.

 

[Sjc3081]

SDI HD9 14x7 wheels 6+1 front and 5+2 rear will maintain exact factory width. 28/10-14 Rock A Billys fit no rub under any circumstance.

 

[red1329]

I've never had an issue with the spacers loosening and I have over 7000 miles on them.

agreed, there is no more of a chance of these spacers coming loose then your actual rim coming loose. if there tight there tight.