P1000 Share your Pioneer 1000 Photo's

[Smitty335]

Put the 1000 eps into service at the ranch for the first time today.
View attachment 31818 View attachment 31819 View attachment 31820

I cut wood all over the place, within a 15 mile radius of the house, I have found that hooking my SxS to the splinter is the only way to trailer them.

 

[Admin]

 

[Plumber32]

Was chilly but awesome full shield may have been better although every time I seen my buddy he was leaning out the side.


Sent from my iPhone using Tapatalk

How did the pioneer stack up to the canam?

 

[Montecresto]

I cut wood all over the place, within a 15 mile radius of the house, I have found that hooking my SxS to the splinter is the only way to trailer them.

Yeah, I wouldn't trailer one behind a truck.

 

[perry]

Looks Great but looks like work to me. HAHA

 

[Jait25]

How did the pioneer stack up to the canam?

He mentioned he was running hot due to pushing snow where pioneer was just chugging through. Guess that little extra clearance helped me out.


Sent from my iPhone using Tapatalk

 

[Carleton]

I have highlifter forward arched a arms so they don't rub at all. The tires only measure about 28.5 because I aired them down to 8 psi. I thought I was going to have to trim the Factory UTV skidplates but they don't rub there either.

That's exactly the wheel setup I think I'm going to go with. Also I want to run the HL arms without lift. Do you have any wheel spacers front or rear? And what's your width front and rear?

 

[ToddACimer]

Bought a new 18' car hauler for the Pioneer today.

 

[Tot]

It's been awhile since I posted anything so hers mine all shined up with my new rock lights

Sent from my SM-G935V using Tapatalk

 

[GlockMeister]

It's been awhile since I posted anything so hers mine all shined up with my new rock lights

Sent from my SM-G935V using Tapatalk

Looks good . What kind of bumper are you running now? If I remember correctly you had a tough country.

 

[wilson111]

That's exactly the wheel setup I think I'm going to go with. Also I want to run the HL arms without lift. Do you have any wheel spacers front or rear? And what's your width front and rear?

I don't have any wheel spacers bc I didn't want the tires to stick out further than factory. Width is really close to factory but. It sure completely. The wheels have 5+2 offset which is really close to factory.

 

[Tot]

Looks good . What kind of bumper are you running now? If I remember correctly you had a tough country.

I did, I sold it because it was really heavy and I didn't like the way it sat on my machine. I had this one custom built

Sent from my SM-G935V using Tapatalk

 

[trigger]

It's been awhile since I posted anything so hers mine all shined up with my new rock lights

Sent from my SM-G935V using Tapatalk

That first pic makes me want a P1...Nice looking machine Tot!

 

[Tot]

That first pic makes me want a P1...Nice looking machine Tot!

Thank you!

Sent from my SM-G935V using Tapatalk

 

[Eltobgi]

I did, I sold it because it was really heavy and I didn't like the way it sat on my machine. I had this one custom built

Sent from my SM-G935V using Tapatalk

Could you post a few more pics of your custom bumper. Your rig looks great!

 

[Tot]

Could you post a few more pics of your custom bumper. Your rig looks great!

Thanks!

Here you go











Those are the best ones I have of it

Sent from my SM-G935V using Tapatalk

 

[Eltobgi]

Thanks!

Here you go











Those are the best ones I have of it

Sent from my SM-G935V using Tapatalk

Thanks @Tot! I really like it! Great one of a kind mod! But just a heads up...it looks like someone got away with your headlights

 

[Tot]

Thanks @Tot! I really like it! Great one of a kind mod! But just a heads up...it looks like someone got away with your headlights

Yeah that's a long story. I've got lights back in it now. Short version, I had a guy supposed to build a set of headlights for me and several months went by and I never got them. I finally got some stock lights back in it and I may take them out and build a bracket to put cubes in it

Sent from my SM-G935V using Tapatalk

 

[trigger]

Thanks!

Here you go











Those are the best ones I have of it

Sent from my SM-G935V using Tapatalk

Just spit balling here, and that front end looks great the way it is...a skid plate on the lower section below the radiator would look BA and serve a purpose as well?

 

[Tot]

Just spit balling here, and that front end looks great the way it is...a skid plate on the lower section below the radiator would look BA and serve a purpose as well?

I've thought about that or some expanded metal where the plastics stop

Sent from my SM-G935V using Tapatalk

 

[CumminsPusher]

Thank you!

Sent from my SM-G935V using Tapatalk

Love that bumper! Looks good Tot


Sent from my iPhone using Tapatalk