BOX1

P1000 spare tire rack with yeti tundra 45 and rotopax mount

Moses

Moses

Owner - Brick City Fab
Vendor
Jul 29, 2016
199
471
63
Gilbert arizona
Ownership

  1. 1000-5
Honda pioneer 1000-5 over head spare tire rack with a yeti tundra 45 cooler rack and side mount rotopax mount.
[email protected]
IMG 7636
IMG 7643
IMG 7644
IMG 7650
IMG 7651
IMG 7652
IMG 7653
 
Gator

Gator

The Most Unknown Member
Lifetime Member
Sep 16, 2015
2,468
10,325
113
Louisiana
Ownership

  1. 700-2
That is incredible. Good work.
Will the rotopax fit between the tire and Yeti? I'm thinking it would be protected from limbs.

You really did a good job of design AND fabrication.
 
  • Like
Reactions: Moses
Moses

Moses

Owner - Brick City Fab
Vendor
Jul 29, 2016
199
471
63
Gilbert arizona
Ownership

  1. 1000-5
That is incredible. Good work.
Will the rotopax fit between the tire and Yeti? I'm thinking it would be protected from limbs.

You really did a good job of design AND fabrication.
thank you I appreciate that. Unfortunately I don't believe that the rotopax cans will fit in between. The rotopax cans aver very thick so I dont seen that being an issue. i also wanted to allow for easy access to the rotopax with it being mounted on an open end.
 
joeymt33

joeymt33

i4WD=imitated 4WD
Moderator
Lifetime Member
Supporting Member
Club Contributor
Mar 17, 2015
11,092
39,078
113
Guntersville, AL
Ownership

  1. 1000-3

  2. 1000-5
It does look good, Can people behind the vehicle see the brake lights?


SIGNATURE:

Quote by DrFubar: joeymt33, this could be your next signature: "I should be more understanding. I should know by now that a little hill to me probably is a big hill to you.;)"
 
Moses

Moses

Owner - Brick City Fab
Vendor
Jul 29, 2016
199
471
63
Gilbert arizona
Ownership

  1. 1000-5
It does look good, Can people behind the vehicle see the brake lights?


SIGNATURE:

Quote by DrFubar: joeymt33, this could be your next signature: "I should be more understanding. I should know by now that a little hill to me probably is a big hill to you.;)"
Thank you. It's designed to mount toward the top of the rear cage. So yes you'll be able to see tail lights no problem
 
  • Like
Reactions: joeymt33
solrus

solrus

Well-Known Member
Lifetime Member
Sep 2, 2015
1,629
2,511
113
Montana
Ownership

  1. 1000-5
Moses, what pipe did you use for this mount?

Sent from my XT1585 using Tapatalk
 
  • Like
Reactions: Moses
Manwell

Manwell

Well-Known Member
Lifetime Member
Jul 12, 2016
803
2,439
93
Georgia
Ownership

  1. 1000-5
I really like mine, that's for sure... finally got my spare wheel and tire so its mounted on there as well.
IMG 3313


Simple to swing it out of the way if need be

IMG 3314


The dump function is no problem

IMG 3315


Plus it opens in either direction

IMG 3319


I would do it again... IMG 3317
 
solrus

solrus

Well-Known Member
Lifetime Member
Sep 2, 2015
1,629
2,511
113
Montana
Ownership

  1. 1000-5
Moses , can you fabricate 1.625" cage clamps for P500? Only 1.75" on ebay and etc. If yes, how much ?

Thank you!
 
Moses

Moses

Owner - Brick City Fab
Vendor
Jul 29, 2016
199
471
63
Gilbert arizona
Ownership

  1. 1000-5
Moses , can you fabricate 1.625" cage clamps for P500? Only 1.75" on ebay and etc. If yes, how much ?

Thank you!
I use 1" wide .125 thk rubber strips to account for the tube diameter on the 500 and 700. I get clamps machined at a lot minimum of 100 so I cant afford to purchase 1.625 clamps at the moment...I dont know of anyone that offers 1.625 clamps...
 
Last edited by a moderator:
solrus

solrus

Well-Known Member
Lifetime Member
Sep 2, 2015
1,629
2,511
113
Montana
Ownership

  1. 1000-5
Thank you! That's should work.
 
BOX2
box3

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!