P1000m5 Tool(s) required for Fox QS3 preload adjustment

[Moxdmguy]

I have the Fox QS3 and just changed out my tires and would like to add a couple inches of preload. What tools are you all using to accomplish this? Any links or specific wrench sizes are appreciated!

 

[NTCPrezJB]

Spanner wrench should be what you need to search for.

 

[Moxdmguy]

Thank you! Any particular size of spanned wrench for the QS3?

 

[NTCPrezJB]

Knowing Fox they sell one with their logo on it. 😂🤣

I’ve seen links to various ones members here have used. Someone will probably chime in with a link for you shortly.

 

[Remington]

Thank you! Any particular size of spanned wrench for the QS3?

What i use
Progressive Suspension SW-783 3/8" Drive Preload Spanner Wrench https://www.amazon.com/dp/B0027G4XZ8/?tag=sxsweb24-20

 

[CID]

It depends on the diameter of the shock, I used this on my 2-1/2" Talon shocks. I just Googled 2-1/2" Fox spanner and it popped up. Whatever you use, jack the buggy up as high as possible to unload the springs, it'll make it MUCH easier.

Amazon.com

They came as a pair, I didn't use the lower one -

 

[301]

I use a pair of knit gloves with rubber coated palm. Jack it up, loosen the lock ring and turn them down by hand. Hella faster and less bloody knuckles.