P1000m5 What did you add to/do with your Pioneer 1000 5 today?

[Remington]

View attachment 331173
Drilled hole and placed grommet.
View attachment 331174
View attachment 331175
View attachment 331176
Original, look behind battery all the wires.

Now see difference.
View attachment 331177
Made from a splash guard from a Avalon. Worked great to me. Took my time.


Sent from my iPhone using Tapatalk

Looks great! Good job on the install. How do u keep your rig showroom clean? What are you using?

 

[Admin]

 

[Russ989]

Looks great! Good job on the install. How do u keep your rig showroom clean? What are you using?

I gave up on showroom clean after I dragged the driver side of my 1000 through Stoney Lonesome in Alabama.

 

[Remington]

I gave up on showroom clean after dragged the driver side of my 1000 through Stoney Lonesome in Alabama.

That aint no $hit! I have more scratches than Carter has Liver pills!
not your Carter! 🤣

 

[Russ989]

That aint no $hit! I have more scratches than Carter has Liver pills!

I knew it was over when my drivers side flopped in that ditch and the door was pushing in on my leg. 30 yards in reverse dragging the whole way. 😭

 

[Remington]

I knew it was over when my drivers side flopped in that ditch and the door was pushing in on my leg. 30 yards in reverse dragging the whole way. 😭

Oh yeah, the sound of grinding that gets deeper and deeper 😂
like when the wife thinks she can fit in that tight ass parking spot cuz its 2 spaces closer!

 

[chucksmith0706]

Looks great! Good job on the install. How do u keep your rig showroom clean? What are you using?

I use sc1 on it. Wash regular store it in my shop. Clean with hot water also. I am kinda over the top on keeping it clean. She is two years old in July.

Red one is 2006 model. LT80 is a 1999, KFX 50 in a 2002. Try to keep them all in good shape.


Sent from my iPhone using Tapatalk

 

[Remington]

I use sc1 on it. Wash regular store it in my shop. Clean with hot water also. I am kinda over the top on keeping it clean. She is two years old in July. View attachment 331207
View attachment 331208
Red one is 2006 model. LT80 is a 1999, KFX 50 in a 2002. Try to keep them all in good shape.


Sent from my iPhone using Tapatalk

Thats how i clean mine, SC1 and hot water. I try to keep it clean, but time and in most cases going back out soon just not in the cards!
nice looking ride you have!

 

[bumperm]

Nice work . . . with my luck the splash guard would work to hold all the mud securely in place.

 

[Kal]

Buy programing software for your make of radio.
For me, I now understand how to use and program my TYT 8600 radio 100%
Make sure you get the correct cable.
Great people too.
RT Systems Program Software

I bought the software and cord, as well as another matching radio. I'm going to do some research on the whole channel thing soon. 👍

 

[Dirtstiffs-1000]

I bought the software and cord, as well as another matching radio. I'm going to do some research on the whole channel thing soon. 👍

Give them a call, RT systems, they'll walk you through everything.
One other critical understanding is that by law - FCC, there is a graduated license requirement for each frequency you broadcast.
The FRS, GMRS, MURS license with no test (google) can be had for $35.00.
Short answer - Outside of those frequencies requires a basic Ham radio, technician license.
Do some research into GMRS frequencies.
Sorry, it's a broad and detailed understanding.
Try this read. Good general info.
Very cool once you get over the curve.
2 way radio forum thread

 

[Rayger143]

Installed mudbusters on the rear

 

[chucksmith0706]

Installed mudbusters on the rear

View attachment 331299View attachment 331300

Pleased or not? I would like some just to keep crap from getting in my floor board rear. Just hard to justify that amount for plastic. I purchased some abs sheets going to try my hand at making some minor flaps.


Sent from my iPhone using Tapatalk

 

[bumperm]

Pleased or not? I would like some just to keep crap from getting in my floor board rear. Just hard to justify that amount for plastic. I purchased some abs sheets going to try my hand at making some minor flaps.


Sent from my iPhone using Tapatalk

I thought the same. I'm handy with tools, I'll just make them myself. I didn't. Too many other things to do. Ordered them. They look well made. Haven't installed them yet. Too many other things to do. But, I'll get on it soon . . . and sooner than if I had to make them myself.

 

[Kal]

Pleased or not? I would like some just to keep crap from getting in my floor board rear. Just hard to justify that amount for plastic. I purchased some abs sheets going to try my hand at making some minor flaps.


Sent from my iPhone using Tapatalk

I said the same thing about a roof. At the time a honda roof was about $800 and the thin sheet metal ones were about $550. I ended up making my own roof out of plywood for about a quarter of the cost of a honda roof. I couldn't justify spending $550 for a thin piece of sheet metal either. Eventually I'll build my own metal roof but until then this will work for me.

 

[Kal]

Give them a call, RT systems, they'll walk you through everything.
One other critical understanding is that by law - FCC, there is a graduated license requirement for each frequency you broadcast.
The FRS, GMRS, MURS license with no test (google) can be had for $35.00.
Short answer - Outside of those frequencies requires a basic Ham radio, technician license.
Do some research into GMRS frequencies.
Sorry, it's a broad and detailed understanding.
Try this read. Good general info.
Very cool once you get over the curve.
2 way radio forum thread

Will do. I took a quick peak at the program and started to scratch my head... thanks for the link, I'll start looking into it this week/weekend. 👍 So is GMRS the way to go then?

 

[05Willys]

Pleased or not? I would like some just to keep crap from getting in my floor board rear. Just hard to justify that amount for plastic. I purchased some abs sheets going to try my hand at making some minor flaps.


Sent from my iPhone using Tapatalk

I have them on mine. They stop 95% of the mud. The hole around the rops lets some mud get on the rear seat belt mechanism at higher speeds. I'm pleased with them.

 

[Rayger143]

Pleased or not? I would like some just to keep crap from getting in my floor board rear. Just hard to justify that amount for plastic. I purchased some abs sheets going to try my hand at making some minor flaps.


Sent from my iPhone using Tapatalk

Yes I’m happy with them and they do their job. Durable and easy install.

 

[Dirtstiffs-1000]

Will do. I took a quick peak at the program and started to scratch my head... thanks for the link, I'll start looking into it this week/weekend. 👍 So is GMRS the way to go then?

Yes
Most walkie talkies come with FRS at least and some GMRS Frequencies already. GMRS with license is greater range broadcast frequency.

 

[Dirtstiffs-1000]

Pleased or not? I would like some just to keep crap from getting in my floor board rear. Just hard to justify that amount for plastic. I purchased some abs sheets going to try my hand at making some minor flaps.


Sent from my iPhone using Tapatalk

They work great. Less cleanup time

 

[Robobrainiac]

Had my machine professionally detailed. I don't think it was this clean when I bought it from the dealer. I can't even stay in the seat it's so greasy I slip out of it