P1000 Wheel/Tire pics!

[GEM1N1998]

Out with the 28’s. In with the 32’s.

 

[Dave Fleming]

30”x9.50”x15” Falken MT truck tires on MSA Diesel Wheels. No lift no rubbing.

 

[Sjc3081]

It is impossible, unless you tires are a true 28” or less in height.

 

[ChadD]

View attachment 274592
30”x9.50”x15” Falken MT truck tires on MSA Diesel Wheels. No lift no rubbing.

Looks good! What part of Michigan you from?
Also welcome to the club!

 

[Seadonist]

28x10x14 Mudda In-laws on Sedona wheels with a 2.5” HL bracket lift


Sent from my iPhone using Tapatalk

 

[Csmartini]

35'SView attachment 63863

What mods to your wheel wells did you do? I’m planning a similar set up on mine but don’t wanna KO the wheel wells.

 

[HBarlow]

My wheel & tire choice was made after posting questions and reading many member posts with photos. They're conservative like I am.

I bought a set of Pioneer LE take-off 14" wheels and tires from Shawnee Powersports' ebay store and a set of four Tensor Regulator tires ins size 28x10x14 and a pair of RB3 1" spacers for the rear hubs.

I prefer using Honda oem wheels rather than the popular, "sexy", Chicom wheels many are using. The 28" tires look much more appropriate on the buggy, fill the wheel wells, and are "no contact." The tires require no suspension mods and do not contact any suspension or body parts.

 

[Robobrainiac]

Vision 544 BOLT 5+2, 14x7, +38mm, beadlock wheels with 28x10-14 SuperATV Intimidator Tires.
Machine has high lifter arms, high lifter 2.5" lift, Southern Powersports 1" spacer in front and 2" spacer on rear. Has no rub issues.

Prior to the lift and spacers the tires would rub the inner fender at full lock under compression. I later realized the tires were rubbing slightly on the front strut bolts while turning to the lock.

I did not install the high lifter steering stops with the control arms. I like the factory turning radius and I know I should be fine as long as I don't turn to the lock while diff locked.

 

[chucksmith0706]

Out with the 28’s. In with the 32’s.

View attachment 270774 View attachment 270775

Update with these?


Sent from my iPhone using Tapatalk

 

[gullyjumper]

The orange rings really look cool !

 

[Robobrainiac]

The orange rings really look cool !

Thank you. I thought it made the camo pop.

 

[bumperm]

Thank you. I thought it made the camo pop.

View attachment 291160

And here I was thinkin the whole idea of camo was to blend in??

 

[Isaiah]

Update with these?


Sent from my iPhone using Tapatalk

I run those tires in 32s also. They perform well in rock and decent in mud but it's not designed to be a mud tire lol. They wear fast on the pavement. That and I wish they was a little bit better in mud are my only complaints

 

[NorthernJoe]

I tried the 14x14-27 studded ProArmour WhiteOuts for winter tires. They Suck!

 

[Dirtstiffs-1000]

My wheel & tire choice was made after posting questions and reading many member posts with photos. They're conservative like I am.

I bought a set of Pioneer LE take-off 14" wheels and tires from Shawnee Powersports' ebay store and a set of four Tensor Regulator tires ins size 28x10x14 and a pair of RB3 1" spacers for the rear hubs.

I prefer using Honda oem wheels rather than the popular, "sexy", Chicom wheels many are using. The 28" tires look much more appropriate on the buggy, fill the wheel wells, and are "no contact." The tires require no suspension mods and do not contact any suspension or body parts.

View attachment 291033 View attachment 291034 View attachment 291035

The LE & Deluxe rims are made in China.

 

[bumperm]

I tried the 14x14-27 studded ProArmour WhiteOuts for winter tires. They Suck!View attachment 379572

Did you say, they suck . . . or you're stuck? Them's look like winter time racing slicks!

 

[NorthernJoe]

Did you say, they suck . . . or you're stuck? Them's look like winter time racing slicks!

Both, I switched to tracks