P1000 Wheel/Tire pics!

[aauman88]

Did you have any problem spinning those 31s r did you have gearcreduction
I’m looking to run 32

These measure 32” and with portals and tune it has no issues running a buddies 35”. I’m either going 35 or 37’s. The tune alone will make your machine spin 32’s like it better than stock

 

[Admin]

 

[aauman88]

I ran 32’s before my portals and with Tune only had zero issues. Just got good price on Portals and got them.

 

[Capitan]

I wanna play!
My deluxe came with steel wheels, so i was forced to upgrade (had to sell idea to wife, she hated deluxe rims)
I grabbed a set of terrabites 28x10-14 on msa m32 axe wheels matte grey.

View attachment 53634 View attachment 53635

What is this windshield you have? Where did your purchase it and how much? With the front opening, does it reduce the dust roll from the rear of hte unit to the cabin area? I really need to reduce the dust which sucks in from the rear to the cab area.

Thank you

Dave

 

[OhioPro205]

These are Kanati Montgrual tires with the “ride on” from RMATV and they are still not good above 45 or so. The start shaking really bad. Any ideas??


Sent from my iPhone using Tapatalk Pro

 

[aauman88]

Both on 38x10 BKT’s and 20” Fuel wheels.

 

[DDDonkey]

Both on 38x10 BKT’s and 20” Fuel wheels.

View attachment 223463 View attachment 223464 View attachment 223465 View attachment 223466 View attachment 223467

What a-arms, and portal size are you running on both machines? Any rubbing, I ask because I rub with 35"s and a 4" portal and 814 shocks. Looks great !

 

[aauman88]

Red one has 4” 30% portals, Texas Tough Customs 3” lift, front and rear track bars, Fox shocks with about 2” lift with preload and 19” limit straps. Zero rub. 71” wide

White one has 4” 30% portals, Texas Tough Customs 6” long travel lift, stock shocks and 19” limit straps. Not even close to rubbing. 83” wide

Both kits move the front tires forward 3.5” and rear tires back 3.5”.

 

[Adam490]

Both on 38x10 BKT’s and 20” Fuel wheels.

View attachment 223463 View attachment 223464 View attachment 223465 View attachment 223466 View attachment 223467

Just out of curiosity, what does that wheel/tire combo weigh?

 

[aauman88]

Just out of curiosity, what does that wheel/tire combo weigh?

88lbs per corner if I’m not mistaken. I know the tire is 68lbs and it’s easy to cut them down to 50 if I need to but so far I don’t need to

 

[Sjc3081]

View attachment 223462

These are Kanati Montgrual tires with the “ride on” from RMATV and they are still not good above 45 or so. The start shaking really bad. Any ideas??


Sent from my iPhone using Tapatalk Pro

Most likely alignment issue.

 

[MuskyHunter]

System 3 sb5 bead locks with 28” carnivores on stock suspension.

 

[100Acre]

Just got a couple new Tensor Regulators to replace a sidewalk slashed tire and an extra.
28/10/12
I did buy them from RMATV only because they were on sale. Getting ready to ride at RRB in two weeks. Thanks @Plumber32 these are good tires!

 

[Smitty335]

Just got a couple new Tensor Regulators to replace a sidewalk slashed tire and an extra.
28/10/12
I did buy them from RMATV only because they were on sale. Getting ready to ride at RRB in two weeks. Thanks @Plumber32 these are good tires!
View attachment 223744

And may I ask what are you doing riding on side walks?

 

[100Acre]

And may I ask what are you doing riding on side walks?

CHASING DOWN AND RUNNING OVER UNICYCLISTS AND RECUMBANT CYCLISTS BECAUSE THEY'RE WIERD.

 

[psbos]

System 3 sb5 bead locks with 28” carnivores on stock suspension.
View attachment 223706

How do you like the carnivores?Any spacers at all? That set up looks really good

 

[MuskyHunter]

How do you like the carnivores?Any spacers at all? That set up looks really good

I love the tires. Not a huge fan of the wheels. I’m running 5+2 all around so I have 1” spacers in the rear.

 

[Ridinfool]

STI HD9 Beadlocks with 28-10-14 Sadona ripsaws

 

[psbos]

Anybody know if 29x9.5 will fit with stock suspension?

 

[TripleB]

Anybody know if 29x9.5 will fit with stock suspension?

More than likely not. Unless they measure really small. U will need front foward arched a-arms.

 

[Koenig]

Sorry just seen this. At the time I had just 2.5” bracket lift, arched arms and shock spacers. Here’s pics now with 4” portals, 2.5” bracket lift, arched arms and Fox shocks. First pic is same 32” Outback and second pic is 34.5 Black Bears which are an Outback max knockoff

View attachment 213518 View attachment 213519

Did you have any rubbing with the a arms, bracket lift, and 32" setup?