P1000 Wheel/Tire pics!

[Spoonbill]

Got the Shoes for Spoonbill. Will finish the Winch Install and new Bumper this week!

 

[Thebert11]

I went with 30x10-16s

View attachment 55672

Did you have to put a lift to fit 30s

 

[Thebert11]

My new ones

View attachment 118457 View attachment 118458 View attachment 118459 View attachment 118460

Did you put a lift r just the arched a arms and arms

 

[Thebert11]

My new ones

View attachment 118457 View attachment 118458 View attachment 118459 View attachment 118460

Did you put any lift on it

 

[Smitty335]

I thought I'd posted in this thread, but I guess not..

14" Raceline Podium beadlocks with MotoHammers. 11" rear, 9" front. Damn tires wear like iron.. somewhere around 1700 miles on them so far, and tons of tread left.

View attachment 165199

I like the pup better than your tires and rims! HA! But I'm a pup guy! HA!

 

[aauman88]

Did you put any lift on it

Sorry just seen this. At the time I had just 2.5” bracket lift, arched arms and shock spacers. Here’s pics now with 4” portals, 2.5” bracket lift, arched arms and Fox shocks. First pic is same 32” Outback and second pic is 34.5 Black Bears which are an Outback max knockoff

 

[99NTRAIN]

STI HD10 - MATTE BLACK/SMOKE

 

[Thebert11]

Sorry just seen this. At the time I had just 2.5” bracket lift, arched arms and shock spacers. Here’s pics now with 4” portals, 2.5” bracket lift, arched arms and Fox shocks. First pic is same 32” Outback and second pic is 34.5 Black Bears which are an Outback max knockoff

View attachment 213518 View attachment 213519

Did you have to change the axles with the arched a arms and lift

 

[aauman88]

Did you have to change the axles with the arched a arms and lift

Nope still running stock axles. I’m about to change my whole setup. Arms, bracket lift and HD tie rods coming off if anyone interested

 

[TripleB]

Nope still running stock axles. I’m about to change my whole setup. Arms, bracket lift and HD tie rods coming off if anyone interested

How much for the a-arms?

 

[Russ989]

Nope still running stock axles. I’m about to change my whole setup. Arms, bracket lift and HD tie rods coming off if anyone interested

What are you going to do?

 

[Russ989]

 

[Smitty335]

View attachment 214442

Bad looking Mo Foos! All lives matter!

 

[aauman88]

What are you going to do?

Texas Tough Customs 3” lift and tie rods. Gives me rear offset I need to run bigger tires without going too high

 

[aauman88]

How much for the a-arms?

Not sure yet. Was hoping it would all go together.

 

[aauman88]

https://www.facebook.com/1484763651658451/posts/1714292308705583

 

[aauman88]

Like that but mine will be Honda Red

 

[Thebert11]

Sorry just seen this. At the time I had just 2.5” bracket lift, arched arms and shock spacers. Here’s pics now with 4” portals, 2.5” bracket lift, arched arms and Fox shocks. First pic is same 32” Outback and second pic is 34.5 Black Bears which are an Outback max knockoff

View attachment 213518 View attachment 213519
How much for it all

 

[aauman88]

$750 for HighLifter arched arms F/R, HighLifter 2.5” bracket lift and SATV HD tie rods. That’s picked up price in middle GA or close.

Arms and ball joints was 900, bracket lift was 200 and HD tie rods was 220. None of its hurt. Front lower arms have a few chips but you can get touch up paint from HighLifter I think.

Hell I might even sell my 15” rims and 31” OutBack Max’s

 

[Thebert11]

$750 for HighLifter arched arms F/R, HighLifter 2.5” bracket lift and SATV HD tie rods. That’s picked up price in middle GA or close.

Arms and ball joints was 900, bracket lift was 200 and HD tie rods was 220. None of its hurt. Front lower arms have a few chips but you can get touch up paint from HighLifter I think.

Hell I might even sell my 15” rims and 31” OutBack Max’s

View attachment 214492 View attachment 214493 View attachment 214494 View attachment 214495 View attachment 214496 View attachment 214497 View attachment 214498 View attachment 214499 View attachment 214500 View attachment 214501 View attachment 214502

Did you have any problem spinning those 31s r did you have gearcreduction
I’m looking to run 32