P1000 Wheel/Tire pics!

[Smitty335]

I don't have any head on pics with those wheels installed. If I can find time I'll swap them over real quick and snap a couple. Maybe these will help.
View attachment 57267 View attachment 57268
I sure like how they don't throw mud at me like my 5+2's did.

With the 6 + 1 is the rear and front outside tire widths the same or narrower on the rear?

 

[Tigermark]

Awsome, what are rim specs14”x? Plus what is the offset

14x7.

SATIN BLACK
High Resolution



XS128 MACHETE


XS128 Machete Wheels by KMC XD Series® rip through limits. They thrive on the dirt and chaos of extra-duty, off-road racing. They are built for those who need precise equipment for an imprecise environment. Light- weight, strong, and race-tested, these wheels are always looking to take on the next challenge.

Each Wheel Includes 1 center cap, 3 cap bolts
Available Wheel Sizes 14×7 | 14x10 | 15×7
Available Bolt Pattern(s) 4×110 | 4×137 | 4×156
Wheel Offset(s) +10mm | +35mm | -47mm
Wheel Finish Gloss Black Paint
Wheel Cap XD-Pro Cap (Bolt-on)
Warranty Lifetime Structural | One-Year on Finish

 

[mike48]

yepView attachment 53647 View attachment 53648before the chop View attachment 53649after no lift didnt rub to bad

I like them may check on some.
Thanks!!

 

[mike48]

I wanna play!
My deluxe came with steel wheels, so i was forced to upgrade (had to sell idea to wife, she hated deluxe rims)
I grabbed a set of terrabites 28x10-14 on msa m32 axe wheels matte grey.

View attachment 53634 View attachment 53635

nice looking wheels!

 

[my99svt]

I just put on some
Raceline Ryno 14x7 beadlock on all for corners wrapped with some
30x10x14 Roctane XD’s




Sent from my iPhone using Tapatalk

 

[JTW]

I just put on some
Raceline Ryno 14x7 beadlock on all for corners wrapped with some
30x10x14 Roctane XD’s
View attachment 60180
View attachment 60181


Sent from my iPhone using Tapatalk

They look so good pimp daddy!

 

[Choped5er]

I currently run 30" itp blackwaters and love the traction but have already had a good slice in one front, thinking of going 10ply but cannot find a similar tire. Ant suggestions will be appreciated


Sent from my iPhone using Tapatalk

 

[ohanacreek]

I currently run 30" itp blackwaters and love the traction but have already had a good slice in one front, thinking of going 10ply but cannot find a similar tire. Ant suggestions will be appreciated


Sent from my iPhone using Tapatalk

A Roctane XD is 50% heavier than a Blackwater so by reasoning there should be 50% more rubber.

 

[Sckottty]

I just put on some
Raceline Ryno 14x7 beadlock on all for corners wrapped with some
30x10x14 Roctane XD’s
View attachment 60180
View attachment 60181


Sent from my iPhone using Tapatalk

Love the camo, was this a vinyl wrap or precut decal? Main question, I'm about to pull the trigger on Quadboss QBT846 28X10R-14 8-Ply and have the option to get 30X10R-14, I love the look of 30" but don't want to have to start cutting my wheel wells up, I do have HighLift 2" and will mounting rubbers on 14X7 4/136 KMC XD. I will be installing 1" spacer on rear

 

[JTW]

Love the camo, was this a vinyl wrap or precut decal? Main question, I'm about to pull the trigger on Quadboss QBT846 28X10R-14 8-Ply and have the option to get 30X10R-14, I love the look of 30" but don't want to have to start cutting my wheel wells up, I do have HighLift 2" and will mounting rubbers on 14X7 4/136 KMC XD. I will be installing 1" spacer on rear

30’s are the reason for the SuperATV forward a arms..

 

[my99svt]

Love the camo, was this a vinyl wrap or precut decal? Main question, I'm about to pull the trigger on Quadboss QBT846 28X10R-14 8-Ply and have the option to get 30X10R-14, I love the look of 30" but don't want to have to start cutting my wheel wells up, I do have HighLift 2" and will mounting rubbers on 14X7 4/136 KMC XD. I will be installing 1" spacer on rear

The wrap came from www.creativeutvgraphics.com
Walter does a fantastic job!

I haven’t cut up any wheel well stuff. I do have the forward A-arms up front and will be installing the rears as well.


Sent from my iPhone using Tapatalk

 

[Delton]

I currently run 30" itp blackwaters and love the traction but have already had a good slice in one front, thinking of going 10ply but cannot find a similar tire. Ant suggestions will be appreciated


Sent from my iPhone using Tapatalk

Mine have a couple decent slices up front too. They still holding air so I'm sending it. They're tough tires.

 

[Delton]

With the 6 + 1 is the rear and front outside tire widths the same or narrower on the rear?

That's a good question. I've never really paid attention to it. Next time I put them on I'll measure. They look to be pretty well lined up in all the pics I can find.

 

[nbomar]

That's a good question. I've never really paid attention to it. Next time I put them on I'll measure. They look to be pretty well lined up in all the pics I can find.
View attachment 60213

If you don’t have a different offset in the rear or a 1” spacer, the rear will be 1” narrower than the front always. @Smitty335


Sent from my iPhone using Tapatalk

 

[Delton]

If you don’t have a different offset in the rear or a 1” spacer, the rear will be 1” narrower than the front always. @Smitty335


Sent from my iPhone using Tapatalk

I did not know that so thanks for sharing. 1" would be kinda hard to tell with naked eye.

 

[my99svt]

I did not know that so thanks for sharing. 1" would be kinda hard to tell with naked eye.

I can tell it on mine. I can also tell you that with my 30’s and the Roctanes, i need to install my front mudbisters!!!!


Sent from my iPhone using Tapatalk

 

[JTW]

I did not know that so thanks for sharing. 1" would be kinda hard to tell with naked eye.

You clearly have more to work with than some of us!!

 

[Smitty335]

If you don’t have a different offset in the rear or a 1” spacer, the rear will be 1” narrower than the front always. @Smitty335


Sent from my iPhone using Tapatalk

Thats what I thought, so I need to add spacers to the list. I'm thinking about the helium ballon that mounts under the roof, so I can just float over stuff and leave my suspension stock. HA!

 

[Bradley-Thornton]

17" STI HD4 Wheels - Gloss Black
34x10x17 Outbacks


17" STI HD4 Wheels - Gloss Black
32x10x17 Outbacks

 

[Delton]

I can tell it on mine. I can also tell you that with my 30’s and the Roctanes, i need to install my front mudbisters!!!!


Sent from my iPhone using Tapatalk

I was considering removing mine as they ain't really needed now. After last weekend's ride at Mary's Ridge, I'm surprised as hell they're still in one piece lol