P1000m3 Wire gauge for auto backup light

[Ichybod]

I ordered the pigtail aux connector for the backup alarm connector to run a single auto backup LED light. I'm going to run about 9 feet to the top of the ROPS. Which gauge wire would suffice?

Thanks

 

[Mopower58]

I used 14ga on mine and it runs two b/u lights. Mine runs straight back behind the muffler.

 

[TxDoc]

Here is a little primer for info

12 Volt Wiring: Wire Gauge to Amps – Offroaders.com provides information and entertainment to 4×4 enthusiasts worldwide

www.offroaders.com

Sent from my motorola edge plus 2023 using Tapatalk

 

[Ichybod]

Here is a little primer for info

12 Volt Wiring: Wire Gauge to Amps – Offroaders.com provides information and entertainment to 4×4 enthusiasts worldwide

www.offroaders.com

Sent from my motorola edge plus 2023 using Tapatalk

Thanks for the info!

 

[Hondasxs]

18 or 16 is fine.

I don't recommend a light with a draw of more than 5 amps.

Online charts are usually based on a <2% expected drop.
Many automotive applications find a 5% or more voltage drop to be more common.
Changing it to a 5% drop will result in 18g being good for 18 feet at 12v