P500 Pioneer 500 / 520 Tablet Holder / Storage Box - Great GPS mount & glovebox combo

[JACKAL]

I just ran across this on Amazon.com, it is from the seller I bought my LED headlights from. If you do not already have a glovebox mod AND want a tablet / GPS holder this could be the ticket for $104

https://www.amazon.com/POKIAUTO-Electronic-Adjustable-Navigator-Accessories/dp/B0CSYGZZY2?tag=sxsweb24-20

 

[trigger]

This has my interest. Looks like it mounts over the safety plate, no cutting required. Wonder if a guy could incorporate the two? Take the door off a glovebox, leaving the cubby there and mount this over top. That would give more storage. Also wonder if those two bottom tabs that hold the Ipad would allow it to be plugged in. That would be a BA setup.

 

[JACKAL]

This has my interest. Looks like it mounts over the safety plate, no cutting required. Wonder if a guy could incorporate the two? Take the door off a glovebox, leaving the cubby there and mount this over top. That would give more storage. Also wonder if those two bottom tabs that hold the Ipad would allow it to be plugged in. That would be a BA setup.

I was wondering the exact same thing, take door off add on glove box and triple capacity.

 

[Hoosier1960]

I just ran across this on Amazon.com, it is from the seller I bought my LED headlights from. If you do not already have a glovebox mod AND want a tablet / GPS holder this could be the ticket”


I like the looks of this a lot. I just ordered a Samsung A7 Lite but unfortunately the A7 is 8.7 “ and the holder only goes to 8”

 

[JACKAL]

Tab A7 Lite Dimensions

It will fit

 

[100Acre]

Is one available for the 1000?

 

[100Acre]

I found this, but, it looks like it would be in the way of the locking arm mechanism for the Super ATV flip up windshield

 

[JACKAL]

Is one available for the 1000?

See here:

P1000 - JACKAL's 2024 P1K5D Bolt-On Bonanza

Thanks for the headlight review. I dropped these in my wish list. I’m assuming the turn signals just have wires to splice. Our buggy has the sequential TurnPro kit. Can’t remember the details of install but I think there wasn’t any splicing and everything had “factory” connectors. Of course I...

hondasxs.com

 

[Hoosier1960]

Tab A7 Lite Dimensions

View attachment 423387

It will fit

This what happens when I surf the forum later at night. I wasn't even thinking the tablet would be in landscape when in the mount. Thanks @JACKAL !

 

[Scoop]

I've posted about these things a couple or three times in the past few months, the first time last year. First installed it on my Talon. I cut the back out to access the dash behind the cubby.

They do make one for the 1000, but it won't work for me unless I move some existing aftermarket stuff around.

You'll see the exact same thing listed as many different brands, but they are the same thing. Keep an eye open for the cheapest one.

I can't speak for other models, but in the Talon, I think the angle of the tablet if perfect - easily seen by both driver and navigator. I have a pretty thick case on my Samsung Tab A 10.7" and the thickness is not an issue.

 

[Motoman13]

I printed up this glove box insert with no lid. Thought about maybe trying this with the Amazon dash attachment.

 

[ladoredb]

This has my interest. Looks like it mounts over the safety plate, no cutting required. Wonder if a guy could incorporate the two? Take the door off a glovebox, leaving the cubby there and mount this over top. That would give more storage. Also wonder if those two bottom tabs that hold the Ipad would allow it to be plugged in. That would be a BA setup.

I am interested also, BUT I would have to move all my Aux light & Winch switches 😞

 

[trigger]

I printed up this glove box insert with no lid. Thought about maybe trying this with the Amazon dash attachment.

View attachment 424335 View attachment 424336 View attachment 424337

That front edge looks a little thick and that's my concern with the original metal glovebox. I'm sure I can make it work regardless but it would probably make for a better fit and finish the thinner it is. I know of one member that has ordered that dash attachment and is expecting it soon. I'm going to get some detailed pics to see exactly how it lands on the dash but then I'll probably be ordering one too.
Told the wife I was probably adding one more accessory to the P5 and got an "OMG, now what?" Then when I showed it to her it was "oh, that's pretty cool".

 

[Hoosier1960]

I got my tablet holder today. I tried the fit of the tablet in the holder before going out to check the fit on the P500. It is a Samsung A7 Lite with an Otterbox Defender case. It seems pretty stable in the holder but I may add a little foam just for added grip.

 

[Hoosier1960]

Apparently I did something wrong on adding pics. Trying again.

Sent from my iPhone using Tapatalk

 

[Hoosier1960]

Sent from my iPhone using Tapatalk

 

[Hoosier1960]

Sent from my iPhone using Tapatalk

 

[Hoosier1960]

Sent from my iPhone using Tapatalk

 

[Hoosier1960]

Sent from my iPhone using Tapatalk

 

[trigger]

Got mine today. Looked a lot bigger in the pics, this thing's tiny. For those with a glovebox it doesn't line up very well. It'll still be useable space but we'll see when I get it installed. Door and hinge definitely have to come off. Tablet doesn't fit very snug in the holder, assuming that's what the included foam strips are about. Don't know how much is included but was planning to use it for sealing the box around the edges. Again we'll see. Looks cool though and adds some storage. I like it more for relocating the tablet though, frees up room on the dash and puts it out of the way.