Front inner fender/mud blocker/Fender flare

Made a removable inner fender or mud blocker,with a fender flare.The whole thing comes off in one piece,and is held on with only 2 bolts.I made it removable so that the headlight's and voltage regulator are easy to access, plus anything else. First I made a mount to hold the back part on, and the front part just uses one of the front bumper bolts. The frame was tricky to make lots of bends and angles etc:.The frame actually hides up and along the inside of the fender and front grill. I used the same material that I made the cab out of,it's a very durable rubberized canvas.The Fender flare is made from rubber round baler belting.The best part of it is that the whole thing can be removed and installed in a very short time.Having a inner fender will keep all the mud etc: from getting up in around the headlight as well as keep mud/water etc; from getting into the firewall,and up into any electrical stuff.

Though I'd add a couple pics of looking up from underneath.

I really don't have plans to make them,just do stuff like this for myself.I only have a little better then basic tools. Only fancy thing is a pipe bender that I bought a jig for to beable to bend sq tubing. Was tired of cutting and welding to make bends. Just a small heated work space [10 x24] on one end of my garage. Place for me to stay warm and get out of the house,and use my imagination to make and modify stuff.