P1000 22 p1k-5 height with stock hard roof

[gsquared]

Anyone know height of 22p1k-5 with stock hard top roof? I have 79 inches in my toyhauler. Its going to be close. Can anyone confirm exact height of theirs?

 

[Remington]

The search turned up this. Should be dam close give or take.

P1000 - Pioneer 1000-5 LE stock height

Good evening everyone New member here from Canada. I’m about to order my 2018 1000-5 LE from the dealer this week. I’m wondering if anyone has a real world total height on the stock machine with the Honda OEM hard roof. I want to make sure it will clear the garage door height and if not...

hondasxs.com

 

[gsquared]

I did see that thread, thank you. Considering they changed a few things in 22 and its soooo close, wanted to see if anyone had a real world measurement before I decide to go with factory roof or something else.

 

[ODAMO]

I believe the roof adds 3-3/4” to the top of roll bar. I would have to redo my garage doors so I’m lookin at other options

 

[Remington]

I believe the roof adds 3-3/4” to the top of roll bar. I would have to redo my garage doors so I’m lookin at other options

Better yet, chop the top like many of us did. Looks better anyway

 

[ODAMO]

Better yet, chop the top like many of us did. Looks better anyway

Eventually I plan on having a Honda hard rear panel and upper doors so choppin the top would cause even more pain having to modify those too. I am entertaining the idea of a flat alum. roof with a little overhang front and rear

 

[Remington]

Eventually I plan on having a Honda hard rear panel and upper doors so choppin the top would cause even more pain having to modify those too. I am entertaining the idea of a flat alum. roof with a little overhang front and rear

I have soft inclosure and soft mid panel. CEC custom made his emclosure to fit my chop

 

[ODAMO]

I have soft inclosure and soft mid panel. CEC custom made his emclosure to fit my chop

I just looked at their site and their stuff looks good. Just learned about Isinglass windows.
Never heard of it before, How are they in the winter in regards to fogging or cracking?

 

[Remington]

I just looked at their site and their stuff looks good. Just learned about Isinglass windows.
Never heard of it before, How are they in the winter in regards to fogging or cracking?

No issues. Had them before the chop and after since about 2017.
also have it on my Talon

 

[Jankyeye]

I have a Tusk aluminum roof, it’s a lower profile than the factory. Adds maybe 2” at most

 

[Remington]

@gsquared there ☝️ ☝️☝️☝️
is your 22’ answer!

 

[kdraw1000]

I just completed install of the Kolpin Steel Roof on my 22 P1K5 and a SATV Flip up. The Kolpin roof added < 1" except at front above windshield where the brackets for the SATV Flip are. High point at rear is 76". I used expandable foam to fill gaps and overall I am pretty happy with the fit.

 

[gsquared]

I just completed install of the Kolpin Steel Roof on my 22 P1K5 and a SATV Flip up. The Kolpin roof added < 1" except at front above windshield where the brackets for the SATV Flip are. High point at rear is 76". I used expandable foam to fill gaps and overall I am pretty happy with the fit.

View attachment 359547View attachment 359548 View attachment 359549

Very nice. Thank you

 

[PDogRex]

I just went out and measured my '22 P1K-5 Trail, it is all stock but I have added the Honda windsheild, Honda hard roof, Honda Mid/rear panel and the Honda Fabric doors. The highest point is in the very rear of the roof and it measures Exactly 79 inches!

 

[gsquared]

I just went out and measured my '22 P1K-5 Trail, it is all stock but I have added the Honda windsheild, Honda hard roof, Honda Mid/rear panel and the Honda Fabric doors. The highest point is in the very rear of the roof and it measures Exactly 79 inches!

Thank you so much. I appreciate that.

 

[gsquared]

For anyone interested, I started a build up thread for this here it is...
Thread '2022 P1000-5 base model build up' P1000 - 2022 P1000-5 base model build up