3d printed led cage clamp

[CTDpower]

I drew and printed these two piece clamps. Instead of a nut and bolt to clamp them together I used two of these lights from Amazon per clamp. Real simple and clean design to give you interior dome lights and rear cargo lights. The leds are tipped at a 20 degree angle forward and backward, not just pointing straight down.

 

[Admin]

 

[CTDpower]

I can put this file up on thingiverse too. Only works for a 2" roll bar obviously. A couole wraps of electrical tape and it grips perfectly. I'm probably gonna make a few more sizes of clamps for single lights and use them underneath for rock lights.

 

[Hondoman]

I can put this file up on thingiverse too. Only works for a 2" roll bar obviously. A couole wraps of electrical tape and it grips perfectly. I'm probably gonna make a few more sizes of clamps for single lights and use them underneath for rock lights.View attachment 210862View attachment 210863View attachment 210864View attachment 210865

Very innovative! Nice work!

 

[Hondasxs]

Thats a petty good idea.

Been knocking around a dome light idea for the store kinda like this but haven't made any yet. Too much going on currently.

 

[Code54]

I like your design - nice and clean. Looks great. Good work

 

[GlockMeister]

Just be careful not to overtighten them because the head will pop off...i had several on my machine that have done that

 

[CTDpower]

Out of about 20, I've only had one that the head popped off of. Wasn't sure if it was a dud or what, but interesting to know I wasn't the only one lol.

 

[jaymohn]

Nice ctd. Have you thought about selling those? If so how much I’ll buy one

 

[CTDpower]

I can't sell um, my 3d printer belongs to work, but I can definitely send you the file if you can find a printer to use. Sometimes community colleges or highschools are just looking for practical things to print if you have any connections?

 

[CTDpower]

 

[CTDpower]

This is now public at tinkercad.com

 

[Adam490]

This is now public at tinkercad.com

That's awesome, thanks for sharing

 

[PhilCod]

Nice! That is neat to see how you have the lights holding the clamp on and thus lighting up the bed and cab.

 

[Montecresto]

I can put this file up on thingiverse too. Only works for a 2" roll bar obviously. A couole wraps of electrical tape and it grips perfectly. I'm probably gonna make a few more sizes of clamps for single lights and use them underneath for rock lights.View attachment 210862View attachment 210863View attachment 210864View attachment 210865

Good work. I’ll take a pair of them.....👍

 

[Sheetmetalfab]

Good work. I’ll take a pair of them.....👍

I can't sell um, my 3d printer belongs to work, but I can definitely send you the file if you can find a printer to use. Sometimes community colleges or highschools are just looking for practical things to print if you have any connections?

@Montecresto

 

[CTDpower]

3D design Honda Talon Parts - Tinkercad

3D design Honda Talon Parts created by CTDpower with Tinkercad

www.tinkercad.com