BOX1

P700 Accessory Wiring Harness Problem

B

Buzz

New Member
Oct 11, 2017
4
6
3
Lubbock, Texas
Ownership

  1. 700-4
Trying to install LED lights using a Honda Accessory Wiring Harness. It seems most everyone simply inserts the wiring harness in series by removing the cigar lighter plug-in which is female and inserts the accessory harness into the male accessory (Cigar Lighter). I can connect to the lighter end but not the to the power supply side of things.
My harness 08Z02-HL3-A00 has 2 plastic clips and they're both female. Pictures of 08Z08-HL3-600 has the same two female clips. What am I missing? I my pictures, The black plugs will replace each other. But then, I need the green to plug into the black. That ain't happening!

2018 700-4 Deluxe
00100lrPORTRAIT 00100 BURST20200314191216883 COVER100100lrPORTRAIT 00100 BURST20200314191309697 COVER1
 
H

HondaTech

Guest
The best I can come up with (instructions are crap in this regard) is that the wires in the back of the accesory socket are a sub harness. There should be a green 2 pin somewhere that you unplug and put the accesory sub harness in its place.

I cant say I've eve installed a horn or back up alarm on a 700, and the instructions make it appear that the original sub harness is removed and the new one installed in its place.

Edit: The harness you have is applicable to '14-'16 P700 models. Honda eliminated the 2 pin green connector in '17.

You need 08Z01-HL3-600 I believe.
 
Last edited:
  • Like
Reactions: Mudwing
BOX2
box3

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!