B
tjoreo
Well-Known Member
Lifetime Member
Might take a look at this thread. I actually made a variance of it and actually used it this last weekend to load a whole cow elk in the back of my rig. The easiest one I've loaded in quite awhile. I just made a bar like it to keep the line from hitting my plastics and to slip through the gap of the open windshield. I passed the line over the middle bar of my 5 seater, tipped the bed and pulled her in until her head was hitting the bar. I then pushed the bed down and away I went. It worked really well for a solo hunter. Hope you are lucky enough to try out what ever you come up with.
hondasxs.com
P1000 - Winching Deer Into 1000-5
A couple of weeks ago I asked around how to load a deer into the back of 1000-5 with winch. Didn’t get a good solution so I made this. Started with a 3x3 square tube 3’ long 1/8 thick. Welded the mounting plate that comes with a viper max winch to the bottom. Used a ubolt to secure to bumper...
hondasxs.com
B
tjoreo
Well-Known Member
Lifetime Member
I've actually done it once when I owned my 700. I just ran the synthetic winch line over the bumper and across the hood. I had to remove my windshield, but I still ran the line over the middle bar. The little pulley system just allows you to keep from rubbing on the bumper and removing the windshield. My wife still has an elk tag in her pocket, so hopefully I get to try it again. Like I said, good luck to you and hope you get to try it out. Keep us posted.
R
I was talking to a person in the service department at my local dealer a couple of days ago and he asked me how I used my new 700. I told him one of the things was hunting and he suggested adding a wench to the back roll bar for lifting deer into the back. He said he did it years ago so his dad could load a deer by himself. He said he has used it to load muleys in the back without a problem.
