P1000 Compatibility: SATV A-Arms and Trail Armor A-Arm Guards

[Scoop]

Anybody have the SuperATV high-clearance offset a-arms (tubes, not the Atlas boxed a-arms) and the Trail Armor UHMW a-arm guards? I have the full TA skid plate kit and a-arm guards on my 2021 P1K5, but will be swapping the OEM a-arms for the SuperATV versions next week. Just curious if anyone knows if the TA guards will fit the SATV arms. I'm thinking not due to the obvious change in shape. TIA.

 

[Remington]

Negative ghost rider!
There is no manufacture that makes Arm guards that fit the SATV arms or any other Aftermarket arms that Im aware of. Your better off without anyway. Arm guards collect mud and crap and make it hard to get that out, and with sticks and crap in there, can puncture an axel boot. A budy @knuckledeep custom made some arm guards for my SATV arms. They worked well for a few years, just became a pain to get the mud and crap out of arm guards and A few sticks got lodged in and tore some boots so I took them off. If u PM him, Im sure he will still make u a set if u really want some.

 

[Scoop]

Negative ghost rider!
There is no manufacture that makes Arm guards that fit the SATV arms or any other Aftermarket arms that Im aware of. Your better off without anyway. Arm guards collect mud and crap and make it hard to get that out, and with sticks and crap in there, can puncture an axel boot. A budy @knuckledeep custom made some arm guards for my SATV arms. They worked well for a few years, just became a pain to get the mud and crap out of arm guards and A few sticks got lodged in and tore some boots so I took them off. If u PM him, Im sure he will still make u a set if u really want some.

Thanks.

 

[Remington]

Thanks.

Heres what they looked like. They come raw and u pint them what u like

 

[Scoop]

Do you still run yours, despite the negatives you mentioned?

 

[Remington]

Do you still run yours, despite the negatives you mentioned?

No, took them off for those reasons. All a preference

 

[WagginTail]

I had the Honda oem on my factory a arms. They were caked with mud when I took them off to install my SuperATV arms. I decided then I wasn't going to worry about modifying the guards put them back on.

I also have them on my Rincon and they just hold mud and junk. I usually take them off after every ride to clean them out

 

[Scoop]

Appreciate all the feedback, everyone. Looks like I will be leaving them off.

 

[Chriscoe]

I had a set on mine until this past weekend. They are currently for sale online for the same reasons mentioned above.


Sent from my iPhone using Tapatalk

 

[Smitty335]

Appreciate all the feedback, everyone. Looks like I will be leaving them off.

Wise man!

 

[Scoop]

Soon, I'll probably be posting a list of OEM parts for sale that I've taken off in the last couple of months.

 

[Smitty335]

Soon, I'll probably be posting a list of OEM parts for sale that I've taken off in the last couple of months.

I may be interested in the a-arms, depending on price. May turn our P1 into a yard ride. And get another S X S?

 

[Scoop]

I may be interested in the a-arms, depending on price. May turn our P1 into a yard ride. And get another S X S?

If you want my OEM A-Arms, @Smitty335, they are yours for $0.

Let me know and I will bring them to TO.

 

[Scoop]

This is the thread, @Smitty335

 

[Smitty335]

If you want my OEM A-Arms, @Smitty335, they are yours for $0.

Let me know and I will bring them to TO.

Thanks! I just bought new 30" tires and thinking about trading?

 

[Scoop]

Just let me know if you want these stockers.

 

[Smitty335]

Just let me know if you want these stockers.

I think I will take you up on your offer.