Custom Switch Panels for P700 & P1000

[dmcpeak]

I have acquired the panel, have ordered the switches, What are my next steps in order to get all these things working with the rest of my 700? Fuse block? tapped into what? Anyone have a step by step plan? Greatly appreciated!

 

[Admin]

 

[mystic1219]

I have acquired the panel, have ordered the switches, What are my next steps in order to get all these things working with the rest of my 700? Fuse block? tapped into what? Anyone have a step by step plan? Greatly appreciated!

I use a blue sea fuse box added under the hood. I plan to add a relay so it comes on with the ignition. That relay will be triggered by a wire from the back side of the factory 12v outlet. From there follow the wiring diagram with your switches and use relays on any accessories that might need them. Remember to fuse all of the accessories. Do all the wiring you can before you install the panel. Reaching the back of it is a real chore. Pm me if you need help with anything specific.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[my99svt]

If you have any of the second from the bottom 1000 left, I'd like to order one.

 

[mystic1219]

If you have any of the second from the bottom 1000 left, I'd like to order one.

Not sure which pic your referring to (I have multiple posts, in more than one thread so just want to make sure we're on the same page). Can you describe which panel your looking for?

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[my99svt]

Not sure which pic your referring to (I have multiple posts, in more than one thread so just want to make sure we're on the same page). Can you describe which panel your looking for?

Sent from my SAMSUNG-SM-G890A using Tapatalk

5 switches and 4 tiny holes.

 

[Crappie1]

I am interested in one of your switch panels for my 1000-5. I would like the one with the 8 switches and the large hole for the radio. The specs on the radio say the hole cutout is 3.5".

Please let me know how to proceed.
Thanks.

 

[mystic1219]

I am interested in one of your switch panels for my 1000-5. I would like the one with the 8 switches and the large hole for the radio. The specs on the radio say the hole cutout is 3.5".

View attachment 29891

Please let me know how to proceed.
Thanks.

Shoot me a pm, I handle orders that way and take paypal. Which radio are you going to use?

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[ARDuckHunter]

I need one with the Ram mount on the left and 4 to 5 switches on the right. Do you have one of these ready to go?

 

[mystic1219]

I need one with the Ram mount on the left and 4 to 5 switches on the right. Do you have one of these ready to go?

Which pioneer?

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[ARDuckHunter]

Which pioneer?

Sent from my SAMSUNG-SM-G890A using Tapatalk

1000-5

 

[mystic1219]

I have an order placed at the shop and should be picking up more this week after they get powdercoated. I'll put your name on one.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Manwell]

I'll mention here that the switch panel I ordered (yet to install) was shipped quickly and is of high quality. Also, a very reasonable price for what you get - a solution to mounting switches, RAM mount, and other stuff!

Thanks again @mystic1219!

 

[Praxis]

New guy here,

I have a couple of Pioneers that are getting some LED upgrades and I'm in need of some switch panels.

I would like arrange to purchase two switch panels. The first for a Honda Pioneer 700-4; cut for a Ram mount, 1 circular 12v outlet and 4 Carling switches. The second for a Honda Pioneer 1000-4; cut for a Ram mount, 2 circular 12v outlets and 10 Carling switches.

Not sure how to per say, "place an order," but I can purchase through PayPal if that acceptable.

 

[Hondasxs]

Hey @Praxis, Welcome to the club.
Contact @mystic1219 here --> //hondasxs.com/conversations/add?to=mystic1219
He will get you set up.

 

[mystic1219]

New guy here,

I have a couple of Pioneers that are getting some LED upgrades and I'm in need of some switch panels.

I would like arrange to purchase two switch panels. The first for a Honda Pioneer 700-4; cut for a Ram mount, 1 circular 12v outlet and 4 Carling switches. The second for a Honda Pioneer 1000-4; cut for a Ram mount, 2 circular 12v outlets and 10 Carling switches.

Not sure how to per say, "place an order," but I can purchase through PayPal if that acceptable.

I will send you a PM with all the info.

I'll mention here that the switch panel I ordered (yet to install) was shipped quickly and is of high quality. Also, a very reasonable price for what you get - a solution to mounting switches, RAM mount, and other stuff!

Thanks again @mystic1219!

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[1206Dave]

New guy...would like a plate for my 1000-5 with a ram mount, 4 switch holes and a round hole for a 12 volt accessorie. Do you have any? Thanks"

 

[mystic1219]

New guy...would like a plate for my 1000-5 with a ram mount, 4 switch holes and a round hole for a 12 volt accessorie. Do you have any? Thanks"

Pm sent

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[mystic1219]

Made a new thread for this year with lots of FAQ answred.
Multi - Custom Switch Panels (2017 thread)

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Hondasxs]

TOPIC CLOSED.

SEE NEW CONTINUED TOPIC HERE ---> Multi - Custom Switch Panels (2017 thread)