P700m4 DIY bed extender

[Dragon21]

Decided to make my own bed extender. I have a pelican case i got to keep stuff in, but its too wide to fit in a factory bed extender so this is what i came up with. Attaches behind the seat to the anchor points in the floor with zip ties. Ran out of time before figuring

out how to attach the other side. still gotta glue and paint.

 

[swsebek]

There was another guy who used smaller PVC on his,but yours looks better. Nice work

 

[Flash]

Here's some shot of how I did mine. I left it in raw metal till I ran it a few times to see if it needed adjusting then I painted it.

 

[xltman]

How did you secure it?

Sent from my XT1585 using Tapatalk

 

[Flash]

How did you secure it?

Sent from my XT1585 using Tapatalk

I made brackets that I reused the bolts where the cable goes in and there is a hole half way down that if you have the Honda bed extender uses that I used a long bolt and nut and then made a bracket that goes on the tailgate handle that bolts to the bottom of rack that holds up the tailgate , and took off the cables because they keep the gate at a angle and I wanted it flat, if you want I can take better pic of that and post if you want them

 

[ohanacreek]

Here's some shot of how I did mine. I left it in raw metal till I ran it a few times to see if it needed adjusting then I painted it. View attachment 37031View attachment 37032View attachment 37033View attachment 37034

Have something similar in mind like the execution, gonna copy some of it.

 

[Flash]

Have something similar in mind like the execution, gonna copy some of it.

have at it if you need more pic or help let me know just message me

 

[JTW]

Here's some shot of how I did mine. I left it in raw metal till I ran it a few times to see if it needed adjusting then I painted it. View attachment 37031View attachment 37032View attachment 37033View attachment 37034

I like it!!

 

[Azcardinal]

I made brackets that I reused the bolts where the cable goes in and there is a hole half way down that if you have the Honda bed extender uses that I used a long bolt and nut and then made a bracket that goes on the tailgate handle that bolts to the bottom of rack that holds up the tailgate , and took off the cables because they keep the gate at a angle and I wanted it flat, if you want I can take better pic of that and post if you want them

have at it if you need more pic or help let me know just message me

Looks great thinking of making one myself your is one of the best I've seen can u send pick of mount thanks keep up the great work

 

[jinx]

Looks great

 

[N8theGR8]

Here is my wooden bed extender

P700 - Dash and phone storage; bed extension

Thought I would share my POOR MANS storage adds and my bed extension for my P700. -Screwed in a wire mesh wall-file under the glove box (I left enough room to still put your leg up on foot rest [aka leverage support]) -Screwed in some elastic to cover cubby hole, makes a decent phone holder...

hondasxs.com

 

[Boiler363]

Built myself one using some 3/4" aluminum conduit. Not a big fan of diamond tread but figured with the old school slogan I'd use some old school material.... (plus it was salvaged from the scrap dumpster) lol!
The 700 has two plugs covering some unused holes that I bolted the 90° brackets to so it will flip up out of the way with the tailgate up. Used a piece of thin aluminum sheet metal spray bombed red as a backer to make it pop👌

 

[N8theGR8]

I added a booster to my list of mods, here is a link to that and others. Hope it helps!!

Here are some pics.